Post a picture of your custom GS

[steve murdoch]

Gee whiz, Spyder. Look at all that room in the garage.
You need more bikes!
Nice looking 750.

 

[Spyder328]

Thank you all for all the compliments! Its great to see so many people in the GS community like my bike

what size tires are on it???

120/90-18 in the rear and 100/90-19 in the front

Gee whiz, Spyder. Look at all that room in the garage.
You need more bikes!
Nice looking 750.

Oh we have many more bikes, some of which were behind me when I took the photo

 

[kennerth750]

Finished a basket case a bought a while back

 

[Guest]

Wow that's nice, good job! What sort of pipes are they?

 

[Guest]

Pic of my bike taken on summer ride.

 

[kennerth750]

Its a kerker, not the chrome ones tho and it looked pretty awful, i cut of 2.5 inches to give it a reverse cone look since the edge was smashed up anyway, ground down the welds and stripped
the coating and finally polished the crap out of it and finally sprayed it with high heat clear... holding up as of yet but expect to have to redo it yearly.

 

[Guest]

Ah, I've only heard one Kerker in person (they seem not so common over here)... it's on a Kat and it sounds great. High heat paint by all reports is definitely a regular touch up deal, I expect to do the same on my Kat.

I really love your work, she looks the goods and I'll bet is fun to ride too!

 

[Smith794]

1979 GS 1000S
last running 1985
I bought from my brother in 2002.
He bought her new in 1979 from a Del Rio Texas Suzuki dealer.
Engines first start was 1/1/2018
1st ride was 1/13/2018
Put 98 miles on her and was loving every minute.

 

[Gregory]

Sweet looking bike. Did he save the stock pipes?

1979 GS 1000S
last running 1985
I bought from my brother in 2002.
He bought her new in 1979 from a Del Rio Texas Suzuki dealer.
Engines first start was 1/1/2018
1st ride was 1/13/2018
Put 98 miles on her and was loving every minute.

View attachment 53714

 

[Smith794]

Thanks. She has been a long time in the making.
Could not save stock pipes. I needed a tetanus shot just for looking at them.
Airbox was another item that was not able to save.
mice had a hotel set up in it.

 

[steve murdoch]

Great looking S.
How about a full intro in the GS Owners section with a few more pics ofthat beauty.
Don't see many orange trees up here

 

[Jen]

GS450 L. She's still a work in progress but I like how it's coming along. Still need to figure out side covers and change out the front winkers. I might see if I can change how the tank is mounted... not even sure that's possible though. It's been lowered front and back, clip on bars, rear fender chopped, front fender removed, new brake and clutch levers, new bars (I might mount them under the triple tree yet- right now they are on top), new lighting, new seat. The bike lost probably 30+ pounds, so that is sure nice. And I am very short, so it is AWESOME to touch the ground on it. It runs PERFECT, so I don't think I'll fool around with pods or exhaust any time soon.

 

[dorkburger]

Cool! If it runs good, I?d probably back away from the pods as well.

 

[Papapela]

Thoughts? Just picked this up a little while ago. Replaced the seat (the seat had been modified before me... I promise this is at least a slight improvement). What should I do to make it look better? Any saddle bag suggestions so I don?t have to always wear a backpack to work with me?

 

[gdayjr]

I bought this a month or so ago. It is now broken down into as many parts as it is possible to do. A full re build is now under way.
June 1981 Gs1000G. Australian import. Bored out to 1100cc

 

[solarae]

Hoping to paint the tank this summer or better yet paint and swap in a gs450e tank, but that one needs a LOT of work.





20180203_152512 by Edy Smith, on Flickr20180203_152512 by Edy Smith, on Flickr

 

[HardknockJohnny]

'78 GS 750 Bobber​

 

[afraziaaaa]

View attachment 54382
'78 GS 750 Bobber​

You make this hardtail yourself?

 

[old_skool]

some old pics of one of my builds

 

[Motojoe2492]

Afew more

Holy **** bud that's a gorgeous color combo! What enamel is the copper??