• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Spark plug boots

  • Thread starter Thread starter Anonymous
  • Start date Start date
A

Anonymous

Guest
While I was checking over my coils for a wet (rainy) condition misfire, a couple of pieces fell out of the boot for my #1 plug. There is a brass screw & clip, and a 1/2" long cylindrical piece. I also found a spring in the boot. The other boot on the same coil had the screw inside loose, while cylinders 2 and 3 were tight. Now my tech manual gives resistance values from plug cap to plug cap of 30k to 35k ohms. The coil for 2 and 3 measures ok, but coil #1 & 4 gives an infinite reading when assembled. The cylindrical piece (resistor ?) in wire 4 has a value of about 10k ohms, the coil has 10k to 12k ohms, but the piece from wire 1 has no conductivity. I cleaned the inside as well as I could, replaced the springs, and made a temporary replacement from a piece of steel for testing purposes, but will have to buy a new boot to get the resistor and restore it to specs. I suppose it would be prudent to check these contacts for tightness when checking or replacing the plugs, too.

Has any one run into a similar problem?
 
That 1/2 inch long cylinder is your resistor. Don't think you can just buy them. I can replace all 4 boots for under $30 bucks. Do it, if you question them at all. It makes a ton of difference.
 
NGK boots

NGK boots

Many years ago I replaced the stock Suzuki boots with NGK units I bought at my friendly Yamaha dealer -- two long ones for cylinders 2 and 3, and two short ones for the outside cylinders. The starting-in-the-wet problem I had at that time, on that first GS850 of mine, vanished immediately. Since then I've made it a point to replace these boots with NGK boots every few years.

Nick
 
I agree with Nick. NGK boots and change them out every 2 or 3 seasons (these things break down from the heat of the motor). Never even realized that there were stock Suzuki boots, stupid me!!
 
Thanks for the replies. Where do you guys find the NGK boots? Catalogue, indie shop, or NAPA? Also, do you spec them by resistance value, application, or are they kinda universal? I'm gonna have to replace my #2 coil also due to cracked wires, but I gooped them with silicone for now. Just waiting for a rainy day to test things out.

Thanks again.
 
NGK boots

NGK boots

Read my post just two above your last one. These boots are a common dealer item. They're generic. Just get two long ones and two shorter ones, just like I did and described already.

If your dealer doesn't have them, have him order them from a wholesaler he may deal with.

Nick
 
NGK boots

NGK boots

I highly recommend replacing those spark plug caps. I was having problems with my 1982 GS1100GK when it was hot, in that it seemed to be running off less than 4 cylinders.
I was going to replace my coils and wires when I went into the local independent shop, but Paul, the owner of Flaming Pig of Rochester (www.fpcycle.com) told me that these coils and wires rarely go bad and that I should replace the caps. After he talked himself out of the > $100 sale I ordered the 4 caps ($15 in total).
After I replaced the caps, the bike has been running better than it ever has for me (in the two seasons that I've had it).
You can order these from any shop I would suspect.
 
Nick, I went to the local Kawa dealer and was given some sh** about having to have an exact model, he had no clue what I was talking about as for short and long. Do you by chance have the part numbers for them So I can set the dude straight? (hea really got stupid on me when i told him that i wanted them for a Suzi!!)
 
No, I don't, Tim

No, I don't, Tim

Tim, it's been 2 or 3 years since I got these NGK boots. Let me go to my Yamaha dealer this week and find out more specifics about these.

When I got them, I just went to my friendly Yamaha dealer and he knew exactly what I needed. They slide at the end of the spark plug wire. Just pull out the old, slide in the new.

I'll see what I can do on Monday.

Nick
 
Spark Plug Cap Numbers

Spark Plug Cap Numbers

The NGK caps I got for my 1982 GS1100GK are: XB05F and VB05F. One of those numbers is for the longer cap and one for the shorter cap, but I don't recall which... I just have the empty boxes and it isn't apparent.. but of course you will need two of each.

--Mike Trent
 
Thanks, Mike

Thanks, Mike

Thanks, Mike, (canroc), for the specific tip. :D

Nick
 
Boots

Boots

Now I know why my bike runs like cr*p in the rain. Thanks Folks.
 
Re: Boots

Re: Boots

Jay B said:
Now I know why my bike runs like cr*p in the rain. Thanks Folks.
Click to expand...

JB
MY BIKE RUNS POORLY IN THE RAIN BUT NOT BECAUSE OF THE PLUG CAPS--I NO LONGER USE THEM-I REPLACED THE 4 WIRES WITH A BELDEN WIRE SET AND THE REASON THAT MY BIKE RUNS POORLY IN THE RAIN IS THAT MY DYNA COILS DO NOT HAVE THE HOT WIRES PROTECTED FROM THE WEATHER. WHEN THEY GET WET THE WATER CAUSE A SHORT TO GROUND--I AM CORRECTING THAT ONE THIS WEEK ALONG WITH SOME OTHER THINGS THAT SHOWED UP DURING MY TRIP
 
OK thanx for the info, Now I can arm myself with that and not get that dumb look from the dealer again!
 
You must log in or register to reply here.

Similar threads

KEITH KRAUSE
Looking for plug wires for my Dynatek coils.
Replies
1
Views
83
salty_monk
salty_monk
D
Long and Short Plug Boots
Replies
11
Views
212
danny01975
D
K
Sparks, Zats, Ignition Coils, and Gas Mileage
Replies
4
Views
144
kemp
K
oldGSfan
Fired up dormant '83 GS1100E #2, getting close
Replies
4
Views
180
hhart
H
D
No Spark on 2 and 3! Frustrating as can be.
Replies
7
Views
187
pdqford
P
Back
Top