• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Suzuki GS450 Crank Case breather?

  • Thread starter Thread starter safwan.khan
  • Start date Start date
S

safwan.khan

Guest
Hi guys. Sorry for the noob question as I am new to the beast world :) I have a gs450 which leaks oil out the front part of the engine and I suspect that somehow the crank case breather has been blocked which is causing this issue. I have heard that there is a crank case breather hole somewhere on top of the engine but couldn't locate it until I found a big bolt on top of the engine of that leaking bike. Here is a picture:

https://www.dropbox.com/s/zdvxm88t5h5qgvc/IMG_20140303_080914.jpg

Is this the place where there is supposed to be a breather installed? If yes then what do I do after removing this bolt tightened up here by the previous owner? :confused:
 
NO, that is NOT the breather. :eek:

To locate the breather, look up at the top of the engine. Yep, right up under the fuel tank. On top of the valve cover is a T-shaped cover that has a nipple on the back side. There should be a hose running from that nipple to the top-front side of the airbox.

Part #7 in this picture:

15.gif


.
 
Thanks Steve! So now that I have an issue with this part, can you please tell me how do I install oil separator screens into this breather adjustment? I have to make them using a wire gauze myself so need a little guidance :)
Steve said:
NO, that is NOT the breather. :eek:

To locate the breather, look up at the top of the engine. Yep, right up under the fuel tank. On top of the valve cover is a T-shaped cover that has a nipple on the back side. There should be a hose running from that nipple to the top-front side of the airbox.

Part #7 in this picture:

15.gif


.
Click to expand...
 
I have never really paid any attention to the size of the screens, but could probably measure one, if necessary.

Not sure about your 450, but my 850s have four screens. Two are above the gasket, wedged in the cover, the other two are below the gasket, wedged into the cavity in the cylinder head cover.

I don't think there is anything critical about the size of these items. The ones I have seem to be folded to size, then put into place, giving them several thicknesses of screen material for the vapors to pass through.

.
 
Thanks again Steve for the response. The problem here is that before I fit these handmade screens, there was only minimal oil leak from the breather hose after long trips however after fitting the screens, the front part of the bike leaks oil like a fountain gone mad. Here you can see this:

https://www.dropbox.com/s/xlnnl2h8m2...302_202542.jpg
https://www.dropbox.com/s/idojzt4hsf...302_202528.jpg

I just replaced her gaskets and don't think that there could be a gasket leak this early without the breather getting blocked. :confused:

Steve said:
I have never really paid any attention to the size of the screens, but could probably measure one, if necessary.

Not sure about your 450, but my 850s have four screens. Two are above the gasket, wedged in the cover, the other two are below the gasket, wedged into the cavity in the cylinder head cover.

I don't think there is anything critical about the size of these items. The ones I have seem to be folded to size, then put into place, giving them several thicknesses of screen material for the vapors to pass through.

.
Click to expand...
 
Even if there is a blocked crank case breather (which doesn't sound likely), fixing it would not solve a leak that large.

When you replaced the gaskets, did you use Suzuki gaskets or aftermarket ones? The aftermarket gaskets are poor quality and are known to leak.

Try cleaning up the engine and running it for a bit to see if you can figure out where it's leaking from. I'm sorry to say this, but it sounds like you will be replacing the gaskets again.
 
I fixed it. The problem turned out to be a cracked head cover. The cover was leaking oil down the front end of the engine which was dripping down along the exhausts all the way back with air pressure and pooling in the exhaust mufflers. I got the cover welded and slapped it back together with a new gasket with added silicon sealant and now that bike is running fine again. And yes there was no problem with the breather so rightly pointed out! Thanks a lot for the help :)

eil said:
Even if there is a blocked crank case breather (which doesn't sound likely), fixing it would not solve a leak that large.

When you replaced the gaskets, did you use Suzuki gaskets or aftermarket ones? The aftermarket gaskets are poor quality and are known to leak.

Try cleaning up the engine and running it for a bit to see if you can figure out where it's leaking from. I'm sorry to say this, but it sounds like you will be replacing the gaskets again.
Click to expand...
 
Sorry to hijack the post

Sorry to hijack the post

I just got some OEM Suzuki gaskets in for my GS450. Are they sufficient on their own or do you add any type of sealant?
 
ruler7171 said:
I just got some OEM Suzuki gaskets in for my GS450. Are they sufficient on their own or do you add any type of sealant?
Click to expand...

I normally use silicon sealant with gaskets. It forms a rubber like texture when it dries up, making sure there is a good seal every time.
 
You must log in or register to reply here.

Similar threads

peteGSX
1982 GS450 - No Spark
Replies
11
Views
169
peteGSX
peteGSX
E
Drive sprocket oil leak + damage questions
Replies
11
Views
180
eldevigo
E
G
Overheating GS850g
Replies
10
Views
248
Nessism
Nessism
I
GS400 clutch rod seal and cam chain noise.
Replies
1
Views
72
LAB3
LAB3
E
'83 1100E assorted newbie questions - what am I dealing with?
Replies
9
Views
152
eldevigo
E
Back
Top