Twinpot Brake upgrade on 78 Skunk

[salty_monk]

These ones won't work....

http://cgi.ebay.com/ebaymotors/1989..._Accessories?hash=item5ad333fc49#ht_848wt_939

These ones will.....

http://cgi.ebay.com/ebaymotors/1989...ccessories?hash=item5188026ed5#ht_1761wt_1165

Both 89 750. Must be a changeover year.

Dan

 

[Rover]

Thanks,Yes those were the gold ones I was looking at.I'll keep an eye out for the others.
Andy

 

[salty_monk]

Brackets should be here in about a week... My guy forgot the small spacers for the back of the bracket!

 

[theDoktor]

What's the status on the CBR rotor spacers?

 

[Rover]

Brackets should be here in about a week... My guy forgot the small spacers for the back of the bracket!

Please put me down for a set.
Thanks

 

[salty_monk]

Same status. They are all arriving together.

 

[theDoktor]

Excellent! I'll be keeping an eye out for when you post their arrival.
On a related note, what do you use to paint the black spacers and brackets? I wasn't paying attention when I bought a set of silver ones from you last year. They sure have a nice finish quality and I want to keep up your standards!

 

[salty_monk]

I only had silver.... I just scuffed cleaned & hit them with some PJ1 case paint. Been ok so far.

Dan

 

[salty_monk]

Just a quick update... Powder coater lost some parts so we are delayed another week or two.

Dan

 

[Rover]

Rotors

Rotors

Dan,
Question on the rotors; I know the F-3 rotors are ok,how about CBR 600 f-4?
Andy (Rover) Thanks

 

[salty_monk]

I don't believe the F4 will fit.

Worse case I'll bring these parts back with me 11th May but I hope to have them before then...

Dan

 

[salty_monk]

I now have a handful of sets. Should have another handful in a couple more weeks. Steel with black powdercoat.
This reduces costs and allows use of stock caliper bolts which reduces costs again as those fine threads are a bit pricey!

For a kit with all parts incl caliper brackets and the F3 rotor spacers/jigs $80 plus shipping which should be about $6-7 in the US.

As before you fit these at your own risk. You make certain of the suitability and your competence to fit them.
They have not been officially tested, certified, DOT approved or anything.

 

[salty_monk]

Just bumping this as I know there were others who were waiting for them. 2 kits left from this batch now.

See above post.

Dan

 

[theDoktor]

Dan, I need a pair of rotor spacers only. Do you have any?

 

[salty_monk]

Yes should have an extra set.

 

[theDoktor]

Please PM me with cost & shipping.
Thanks:clap:

 

[salty_monk]

PM sent...

Couple more full kits left.

 

[salty_monk]

One I did recently:

2 more kits left at this stage. Some more coming.

 

[posplayr]

One I did recently:

2 more kits left at this stage. Some more coming.

nice rotors , I got some EBC's like that goin on my GSXR.

And I thought u did not like flash?

 

[salty_monk]

I don't.... They're not on my bike! I did them for someone else..