• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Two unrelated questions

Larry D

Larry D

Forum Sage
Past Site Supporter
I have an 81 GS750L.
I'm getting ready to por-15 the tank.

1. Is there a preferred method of getting the last two cupfulls of fuel and the rust flakes out before beginning?

The petcock I removed was surprisingly clean. Maybe it's still good. It's disconnected and sitting on my workbench.

2. Is there a way test it while it's not connected to anything?

I searched and searched and couldn't find anything on these issues.
Thanks Everyone.:)
 
If you have the petcock removed there should be no problem in removing the last bit of fuel. Just tip the tank, drain it, then safely dispose of the gasoline.


Cleaning is best done with hot, soapy, water and a lengthy rinse afterwards..

That said, a garden hose at full flow will do the job. Move the hose tip around to be sure you get water everywhere as you need that to dislodge small rust particles.

Invert and drain the junk several times, then invert the tank and spray the hose from underneath to get out the last bits.

Leave it to dry completely before going farther.
 
Sorry for the second post.

The petcock can be disassembled, cleaned, and then re-used. Gaskets are available from the dealer.
 
Sealing the tank properly requires you to prepare the metal before hand. The Por15 tank sealing kit included three products; gas tank varnish remover, tank phosphate wash to remove the rust and prep the metal, gas tank sealer paint. If you don’t have varnish in the tank it might be okay to skip that step but the phosphate step is critical. My suggestion is to keep the phosphate solution in the tank until all the rust is gone or converted (may take a couple of days). If a chalky residue is left on the tank, follow the phosphate with some alcohol and a bag of aquarium rocks to scrub down the surface of the tank. Dry completely followed by the sealer. My opinion again, but the small can of Por15 sealer is pretty skimpy for a large GS tank – I recommend two cans to make sure all the surfaces are coated. It’s only an extra $10 or so but will provide assurance the entire tank is coated.

Hope this helps and good luck.
 
Thanks for the responses.
The point about the petcock is...it may be good, I don't know. Is there a method of testing it while it's not connected to the fuel system?? It's just sitting on the table waiting to be reinstalled and I'd like to test it.:-k
 
Larry D said:
Thanks for the responses.
The point about the petcock is...it may be good, I don't know. Is there a method of testing it while it's not connected to the fuel system?? It's just sitting on the table waiting to be reinstalled and I'd like to test it.:-k
Click to expand...

Connect a clean hose to the vacuum port (the smaller one) and suck on it.

If you can hear the clicking of the valve, that's good. If there's no click, or you can suck air through there, that's bad.

Next, hook up a MityVac to the vacuum line, pump it up until the valve operates and see if the diaphragm holds pressure.

You can then hook up a clean hose to the fuel port (the larger one) and suck on it see if it operates as expected.

With no vacuum applied to the vacuum port and the handle in the "ON" position, you should get no flow. Apply vacuum to the vac port and you should get flow.

With the handle in "RES", it should operate the same.

With the handle in "PRI" (prime) you should get flow through the fuel line with or without vacuum.

None of these tests tell you whether the thing will actually leak gas from dried-out rubber parts, and the vacuum tests can miss a pinhole leak in the vacuum diaphragm. But you'll be in the ballpark.

Don't try to rebuild it. Rebuilding old petcocks is iffy -- a 50/50 chance at best. It's a far better investment to just get a new one and forget about any problems for another 20 years.

If you have any doubt whatsoever, sell some plasma or mug a few tourists, spend the lousy $50 and replace it with a new one from Suzuki. As I've said before, it controls the flow of an extremely flammable substance mere inches from your crotch, and it can cause massive engine damage if it leaks and fills the crankcase with gas. And burn down your house. You do NOT want this thing to fail or leak.

If it sorta looks new-ish and uncorroded, operates smoothly, and passes the vacuum tests, I'd give it a try once the bike is ready to run. It might have already been replaced, saving you the trouble.
 
That's what I needed. My thinking exactly...maybe it's been recently replaced.
Thank You very much!!:):)
 
Nessism said:
... My opinion again, but the small can of Por15 sealer is pretty skimpy for a large GS tank – I recommend two cans to make sure all the surfaces are coated. It’s only an extra $10 or so but will provide assurance the entire tank is coated.

Hope this helps and good luck.
Click to expand...


Or you can accidentally order the car kit, and have more than you need!:oops::eek::oops:
Oh well, the extra marine clean and sealer will go to good use. I'm still 50/50 on the Sta-bil equivalent.
Probably could jack the thread on opinions on that alone. Let's not. ;-)

So I'm going to use my old (junk) petcock, filled with cured silicone, to seal the bottom through this process. Anyone have a best practice for sealing the top (filler) hole? The cap on my 78 is pretty damn basic, but I still don't want to replace it.
 
Last edited:
Shaughn said:
Anyone have a best practice for sealing the top (filler) hole? The cap on my 78 is pretty damn basic, but I still don't want to replace it.
Click to expand...

I used "expandable SBR rubber plugs" from McMaster-Carr to plug the filler hole and to plug the sender hole. The little 'ears' on the sides of the filller hole were plugged with modelling clay. To plug the petcock hole I made a small blanking plate and just screwed it into the tank with a gasket to make it tight.
 
You must log in or register to reply here.
Back
Top