1980 Wes Cooley in the garage....finally!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bobgroger
    Forum Sage
    Past Site Supporter
    • Jun 2013
    • 2481
    • Enumclaw, WA

    #106
    Originally posted by azr
    The bike isn't used to the Canadian oil yet...
    Canadian oil has been stripped of all harmful substances. Like oil....
    sigpic
    09 Kaw C14 Rocket powered Barcalounger
    1983 GS1100e
    82\83 1100e Frankenbike
    1980 GS1260
    Previous 65 Suzuki 80 Scrambler, 76 KZ900, 02 GSF1200S, 81 GS1100e, 80 GS850G

    Comment

    • chuck hahn
      Forum LongTimer
      Past Site Supporter
      • May 2009
      • 25918
      • Norman, Oklahoma

      #107
      Or a loose wire at the sensor?? Just noticed it was flickering.
      MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
      1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

      NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


      I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

      Comment

      • bccap
        Forum LongTimer
        Past Site Supporter
        • May 2011
        • 27263
        • Vancouver B.C.

        #108
        Originally posted by bobgroger
        Canadian oil has been stripped of all harmful substances. Like oil....
        We had to. When we tested it on Kanadian rats, they died !
        Last edited by bccap; 11-29-2016, 08:58 PM.

        Comment

        • TeamDar
          Forum Sage
          Past Site Supporter
          • Nov 2008
          • 1137
          • St. Louis, MO

          #109
          Put a set of high volume oil pump gears in it. $127 USD shipped to your Canadian door...Dar

          Comment

          • Sandy
            Forum Guru
            Past Site Supporter
            • Feb 2004
            • 7504
            • Cranbrook, BC Canada

            #110
            Originally posted by chuck hahn
            Or a loose wire at the sensor?? Just noticed it was flickering.
            If the light was full on that would cause it to flicker off then on but if it had oil pressure and the light was off it would make no difference.
            '84 GS750EF (Oct 2015 BOM) '79 GS1000N (June 2007 BOM)

            Comment

            • hillsy
              Forum Sage
              • May 2008
              • 1469
              • Brisbane, Queensland, Australia

              #111
              Originally posted by Sandy
              If the light was full on that would cause it to flicker off then on but if it had oil pressure and the light was off it would make no difference.
              That's right - the wire has to ground to complete the circuit, not be open circuit.

              Could also be a dirty / clogged pressure switch.
              Current:
              Z1300A5 Locomotive (swapped my Intruder for it), GS450 Cafe Project (might never finish it....), XT500 Commuter (I know - it's a Yamaha :eek:)

              Past:
              VL1500 Intruder (swapped for Z1300), ZX9R Streetfighter (lets face it - too fast....), 1984 GSX750EF, 1984 GSX1100EF (AKA GS1150)
              And a bunch of other crap Yamahas....

              Comment

              • Sandy
                Forum Guru
                Past Site Supporter
                • Feb 2004
                • 7504
                • Cranbrook, BC Canada

                #112
                On my '79 1000 when I had the oil cooler on it the light would flicker a bit if the idle was low and motor was hot. I removed the oil cooler because up here you really don't need it anyway and voila, no more flickering.
                '84 GS750EF (Oct 2015 BOM) '79 GS1000N (June 2007 BOM)

                Comment

                • trevor
                  Forum LongTimer
                  Past Site Supporter
                  • Oct 2011
                  • 18672
                  • Victoria bc

                  #113
                  Ok guys...you're freaking me out! Lol.......I have to investigate the wiring at the sensor....
                  Rob put in the new Honda reg/rec I picked up for 35 bucks at my local salvage yard and new Rick's stator....
                  Think there was a problem?....lol





                  and new stator cover with an emblem....even if it's not the correct one....

                  No signature :(

                  Comment

                  • only7bikes

                    #114
                    Very pretty bike Trevor.

                    Comment

                    • bobgroger
                      Forum Sage
                      Past Site Supporter
                      • Jun 2013
                      • 2481
                      • Enumclaw, WA

                      #115
                      Originally posted by only7bikes
                      Very pretty bike Trevor.
                      Hey Steve,
                      Got that "L" running yet? I Hope Derrick bought you a new throttle tube. If not, I have a spare....
                      sigpic
                      09 Kaw C14 Rocket powered Barcalounger
                      1983 GS1100e
                      82\83 1100e Frankenbike
                      1980 GS1260
                      Previous 65 Suzuki 80 Scrambler, 76 KZ900, 02 GSF1200S, 81 GS1100e, 80 GS850G

                      Comment

                      • only7bikes

                        #116
                        Actually I have two L's now an 850 found me and it was free. It's a good story because my wife told me not to buy it so my buddy bought it and then decided he really didn't need another project so he gave it to me. Both the bikes run but are in the refurbishment process. I'm looking for a set of handlebars for the GS1000G or GS850G. The L models had horrible wheelbarrow bars and the old bars from my GS1000G are perfect especially riding with a pillion passenger. I'm good on the throttle tube and it was really fun to help Rob.

                        Comment

                        Working...