SusKatCas
Forum Apprentice
Gents,
Please see the attached image of a white "corner" connector body with no mating part.
I don't see a mating harness part.
I don't have two loose, male spade connectors that need a home.
The wires enter the harness loom under the fuel tank.
The wires appear to be orange with a green stripe and light green.
Digging through the color coded schematic obtained from this site (Thank you) the only likely culprit I see is the turn signal relay?
The issue is my own fault. I took the bike apart during covid summer (2020) and then lost my free time. I am finally wiring in the SH775 R/R.
Thank you, Alan
Please see the attached image of a white "corner" connector body with no mating part.
I don't see a mating harness part.
I don't have two loose, male spade connectors that need a home.
The wires enter the harness loom under the fuel tank.
The wires appear to be orange with a green stripe and light green.
Digging through the color coded schematic obtained from this site (Thank you) the only likely culprit I see is the turn signal relay?
The issue is my own fault. I took the bike apart during covid summer (2020) and then lost my free time. I am finally wiring in the SH775 R/R.
Thank you, Alan