• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

"?" about spark plugs

  • Thread starter Thread starter Clone
  • Start date Start date
C

Clone

Guest
What happens to a spark plug over time that will make the bike harder to start? The plugs look clean, light tan, electrode is not worn. But I have noticed that after putting in new plugs a bike will start faster and easier. Do they build up resistance or something else?
 
These days, most everyone uses resistor plugs, except me, I even take the resistors out of the spark plug caps. I've never liked the idea of anything that slows or weakens the path of the spark, no matter how minor. Just thought, if you were using resistor plugs, the resistor may be breaking down & slowing or weaking the spark too much. If you aren't using resistor plugs, I wouldn't have a clue.
 
Clone said:
What happens to a spark plug over time that will make the bike harder to start? The plugs look clean, light tan, electrode is not worn. But I have noticed that after putting in new plugs a bike will start faster and easier. Do they build up resistance or something else?
Click to expand...

How much time are you talking about?

My understanding is that our old GS bikes don't have a whole lot of spark energy so to speak, so it's not surprising that dirty plugs make the bike harder to start.
 
Have you checked to make sure the gap is within tolerance? That can make a big difference on our motorcycles. Proper gap makes a big difference in how efficient an engine runs.
 
Have you checked the voltage going to the coils ?? It could have weak spark. You could have a weak battery too!
 
Always helps to have a nice new connection in the system, even if it's only one of many.
Brand new plugs would have the least possible resistance. I think the "metal qualities" of the grounding electrode change with miles. The tip should get slightly annealed and that does create more resistance to electron flow (amperage). Any rounding of the tip, even though normal, will also somewhat compromise the spark size/path.
So combine a thin layer of carbon, and more resistance, and you'll notice a little difference. Add a bigger problem, like incorrect jetting, etc, then you'll notice a bigger initial improvement.
I just recently changed my '79 1000 plugs after more than 20,000 miles. They looked fine to me and the gap was fine. Just a very slight rounding of the ground electrode tip. I couldn't really notice any improvement but I wasn't really focusing on it at start up. I run the Dyna S and green 35K coils.
Only reason I changed the plugs was because it was the bikes birthday and I ALWAYS get it something for it's birthday.:)
 
KEITH KRAUSE said:
I just recently changed my '79 1000 plugs after more than 20,000 miles. They looked fine to me and the gap was fine. Just a very slight rounding of the ground electrode tip. I couldn't really notice any improvement but I wasn't really focusing on it at start up. I run the Dyna S and green 35K coils.
Only reason I changed the plugs was because it was the bikes birthday and I ALWAYS get it something for it's birthday.:)
Click to expand...

I was about to post exactly the same thought!

If the rest of the ignition system is working correctly, new plugs will make no difference at all. Neither will colder, hotter, iridium, platinum, or any of the other horse manure plugs you'll find out there.

I stick in a set of the standard (and ideal for my engine) NGK B8-ES plugs once a year out of habit.
 
You must log in or register to reply here.
Back
Top