• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

  • In order to help others find info on a particular bike, be sure to put the year, make or model of bike that you are asking a question about, in the Topic Title. This will allow people to pass by posts they have no interest in.

burning oil and catalytic converter

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Guest
My '95 Mazda turned over a quarter million miles last month. I need to license it in NM, which means that I need to pass an emissions test and replace the catalytic converter, the one that Mazda stuck on it 19 years ago.

When I start it cold, I get a puff of smoke. The puffs are gradually getting larger. I assume that the valve guides are bad and getting worse. No noticeable oil consumption between changes, just the smoke on cold start.

Q1: Will this level of oil burning hurt the new catalytic converter?

Q2: What' invovled in changing valve guide seals?
 
A1: I would think that if your trips are long enough to get the cat up to full operating temp and keep it there for a while, that little puff of smoke is not going to hurt it (much). What reason has been given for the 'need' to replace the cat now? Just age, or have you had a preliminary test done?

A2: Usually, that involves pulling the head. However, some have had success by stuffing some thin rope into the spark plug hole while the piston is down, then bringing it up slowly to hold the valves in place while you release the keepers on the springs. It works quite well on some engines, not so well on others.

.
 
Steve said:
A1: I would think that if your trips are long enough to get the cat up to full operating temp and keep it there for a while, that little puff of smoke is not going to hurt it (much). What reason has been given for the 'need' to replace the cat now? Just age, or have you had a preliminary test done?

A2: Usually, that involves pulling the head. However, some have had success by stuffing some thin rope into the spark plug hole while the piston is down, then bringing it up slowly to hold the valves in place while you release the keepers on the springs. It works quite well on some engines, not so well on others.

.
Click to expand...

1) The check enginer light has been on for about 20K miles, code is catalytic converter. Exhaust system is beginning to get noisy.

2) Inventive method. I should probably get an estimate on the cost. My fingers are too weak for head removal and reinstallation.

Thanks,
 
Neat! My engine is very similar to the Miata engine. I might try it, after I get a few other projects out of the way. Thanks.
 
As long as it gets up to temp regularly, the catalytic converter will put up with quite a bit of oil burning -- I've seen as much as a quart every 500 miles with no issues. Eventually, there's a point where it's too much or you get enough buildup to cause issues, of course.

A puff of smoke is nothing much to worry about if oil consumption isn't too high.

Yes, you can replace valve guide seals with the rope trick or an air hold. The rope is probably more reliable if you don't do this often.
 
There is only a puff at start up after sitting overnight. Oil consumption is very low. The drive to work in 9.8 miles, mostly at 45 mph, so there is plenty of time to warm up twice per day. I'm almost convinvced to try the rope method. Access is excellent at the top, and the engine is in several ways identical to early Miata engines.
 
You must log in or register to reply here.
Back
Top