M
mike_of_bbg
Guest
yeah, but does it visibly "droop"? There might be a bit of loosening, but the cam chain tensioner should take most of that out.
-
Required reading for all forum users!!!
Welcome!
Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.A note to new registrants...
All new forum registrations must be activated via email before you have full access to the forum.A Special Note about Email accounts!
DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.A note to old forum members...
I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.
Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...
-
Returning Visitors
If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.
If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.
W
waterman
Guest
Okay here's a small update. It might be related with the cam timing.
Clymer says that on the GS450's, I need 18 links between the cam marks. Even though mine is a GSX400, everything that the manual has said for the GS450 has applied for my engine.
As you can see, I have 20 links between the marks:
Now, with the timing marks setup like this (I'm not sure if it's correct?)
The exhaust cam is pointed here:
I think something is haywire here and I may have bent a valve.
I noticed that when spinning the engine with a ratchet, the chain in between the camshafts is pretty taught at times, then if I spin it some more it loosens up a bit, then if I spin it more it tightens up, rinse and repeat.
Is it possible that the cam chain skipped a couple notches which resulted in the 20 links of space instead of 18? If the cam tensioner is wonky this could occur. Hopefully the valves haven't been bent from contact with pistons if timing was off. I found that the previous owner had the exhaust cam off by one tooth and the intake one tooth long also, bike ran okay. Are you going to pull head and check valves? I would suggest retiming intake cam correctly and then mechanically turn over motor while paying attention to valves to see if they are closing.
Just want to clarify that I do not know the correct cam timing for your model so please double check, I am only making suggestion from what you have disclosed to us. Hopefully it is only a bad tensioner.
D
donimo
Guest
The gsx400 is the same down below, but the head is totally different, I will check my book and see if it mentions anything.
D
donimo
Guest
My book says 20 is correct.
M
MrZig
Guest
20 is correct? Okay, howabout this:
Clymer says that with the T aligned correctly (meaning Cylinder #1 is at TDC, right?) the #1 arrow on the exhaust sprocket should be pointing foward at the gasket level.
On my engine, when the T is aligned and #1 is at TDC, it's arrow #2 that is pointing forward at the gasket level.
Clymer says that with the T aligned correctly (meaning Cylinder #1 is at TDC, right?) the #1 arrow on the exhaust sprocket should be pointing foward at the gasket level.
On my engine, when the T is aligned and #1 is at TDC, it's arrow #2 that is pointing forward at the gasket level.
D
donimo
Guest
And I quote"
"With the "T" mark in exact alignment with index mark on the static plate of the ATU (#1 at TDC), the Exhaust camshaft should have the #1 marked arrow pointing flush with the upper mating surface of the head."
just like in the picture you sent me earlier:
http://img198.imageshack.us/img198/859/camshafttiming.jpg
sounds like you skipped a few teeth, hopefully nothing is wrecked and you can reset and go, not sure though from what you described...
"With the "T" mark in exact alignment with index mark on the static plate of the ATU (#1 at TDC), the Exhaust camshaft should have the #1 marked arrow pointing flush with the upper mating surface of the head."
just like in the picture you sent me earlier:
http://img198.imageshack.us/img198/859/camshafttiming.jpg
sounds like you skipped a few teeth, hopefully nothing is wrecked and you can reset and go, not sure though from what you described...
Last edited:
M
MrZig
Guest
Okay, here's the weird thing. Your manual says the TDC method is the exact same thing I've been doing. IF this is true, then both of my cams have jumped four ****ing teeth. How does this happen?
Step one: Make sure the #1 piston is at TDC and the "T" aligns with the mark.
Timing Mark:
http://img31.imageshack.us/img31/4304/dsc0016.jpg
Piston #1 at TDC:http://img29.imageshack.us/img29/7478/dsc0018.jpg
Step two: Make sure the arrow #1 on the exhaust camshaft sprocket is pointing forwards to the gasket surface
Arrow #2 which should be #1
http://img30.imageshack.us/img30/9910/dsc0017c.jpg
How the flargin blargin does this happen? How does it even run? Something can't be right here.
Last edited:
R
reddirtrider
Guest
I seriously doubt your cams jumped 4 teeth, let alone 1. If they are off, it probably means they were off since the last time the cams were out.
M
MrZig
Guest
Exactly what I was thinking, them jumping 4 teeth just isn't possible. The questions now are A) Why is it running at all and B) Why only now is it causing problems for me?
This is mind boggling.
D
donimo
Guest
does having the Other" T mark (180* over) make it right? My book has the "Tl lF" one as being TDC, you might me on the exhaust stroke there?
D
donimo
Guest
My book says the "T mark on the R side of the plate", you are on the L side...
M
MrZig
Guest
When the other "T" is lined up, arrow #1 is facing forward and correct, but cylinder #1 is at the bottom and cylinder #2 is at TDC. As if it's reversed. Perhaps it is correct after all?
Last edited:
D
donimo
Guest
RH cyl is cyl #1
I know that doesnt make sense, but there you go...
didnt catch that in the pic, sorry.
I know that doesnt make sense, but there you go...
didnt catch that in the pic, sorry.
M
MrZig
Guest
RH is cyl #1? I always thought the left was #1. Well, if that's the case, then my timing and camshafts are all perfectly OK and my entire engine problem lies elsewhere. At least that is ruled out, now.
Edit: BTW Donimo thanks for all the help with your manual and such. I would be very, very lost without it.
If you ever come by I'll buy you a beer or two.
Last edited:
D
donimo
Guest
maybe because the Japanese read right to left?
who knows...
PITA though eh?
who knows...
PITA though eh?
M
mark_vaughn
Guest
Did you check compression yet?
M
MrZig
Guest
No, I havn't done that yet. I'm not sure I should do it with no oil in the engine.
R
reddirtrider
Guest
It won't hurt it. Pull all the plugs and spin it for a couple secs for each reading. Without a load the bearings will be ok.
I'm still interested in seeing what the pistons look like.
M
mark_vaughn
Guest
If you don't hear any scraping when you turn it over by hand then I would do it. It will tell you more than anything without pulling the head.
Pour a little oil over the cams and even some in the chamber (but this will make your compression higher than it actually is), turn it over by hand a few times to coat everything before testing with the starter.
M
MrZig
Guest
Turns out the only compression gauge I have is from the 1970s. It doesn't even screw in, just has a rubber bottom. I know I have some compression because it would pop it out and hiss loudly under the compression stroke. Unfortunately it didn't give me any numbers because I guess it's just too old/broken.
I'll try and find one for further testing. It would be nice to have the numbers.
Quick question, what size are the spark plug holes/threads?
I'll try and find one for further testing. It would be nice to have the numbers.
Quick question, what size are the spark plug holes/threads?
