Then keep watching this space.
The welder called saying the lower case is ready to be picked up and I already have the engine paint.
The welder called saying the lower case is ready to be picked up and I already have the engine paint.
-
Required reading for all forum users!!!
Welcome!
Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.A note to new registrants...
All new forum registrations must be activated via email before you have full access to the forum.A Special Note about Email accounts!
DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.A note to old forum members...
I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.
Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...
-
Returning Visitors
If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.
If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.
De-stinking Penelope
- Thread starter rustybronco
- Start date
Back from the welder.
Last edited:
G
Guest
Guest
"Something" tells me you're going to take Dremel and smooth out those welds... 
I've given that idea more than just a fleeting thought or two.
One of the shift rail pockets has about a mm of melted aluminum from the heat of being welded. I need to remove it and I mght touch up the welds at the same time. I don't want to weaken the weld by removing too much material but the desire to neaten things up a bit is overwhelming.
One of the shift rail pockets has about a mm of melted aluminum from the heat of being welded. I need to remove it and I mght touch up the welds at the same time. I don't want to weaken the weld by removing too much material but the desire to neaten things up a bit is overwhelming.
Only person that will know when the cover is on is you.
And that is the other side of the argument. 
Personally if it doesnt interfere with the cover in any way I would leave it. Nice and beefy in that areas a good thing.
A slight application of a half round file and some crocus cloth to make it look a little more respectable... much better.
Hit the cases and valve cover with prep and etch. One of its uses is to etch aluminum for paint. I need to pick up a few more detailing brushes tomorrow to remove what's left of the corrosion then they'll be ready to paint. Could almost clear the lower engine case as it sits! Decisions, decisions. 
Last edited:
G
Guest
Guest
Could almost clear the lower engine case as it sits! Decisions, decisions.
I have done a lot of research and tried a few recommended CLEAR-COAT products (applied as per the manufacturers specs) but I am yet to find a product that will keep the aluminium from corroding or that will not "yellow" over time. I'm done using clear-coat on the alu bits on these bikes, especially on the parts that go through the heat/cold cycles...
Hope this helps with your decision and doesn't confuse you more
F
Flyboy
Guest
I shall quote a famous painter from these realms, when I had the same quandary;
Larry said:
Thats all your honour, the prosecution rests.
Larry said:
Thats all your honour, the prosecution rests.
G
Guest
Guest
No need to prosecute 
... I'm certainly FOR painting the engine cases, jut not using CLEAR finish but "solid" paint
... I'm certainly FOR painting the engine cases, jut not using CLEAR finish but "solid" paint
I am with the others on just painting the entire thing. I cleared over the engine on the 77 750, which was my first go at such a project, and its brownish yellow in some spots and is gonna need redone at some time. BUT the VHT Universal aluminum WITHOUT clear over it still looks just as awesome as he day it was applied.
If the use of clear-coat on the engine tends to yellow over time when subjected to repeated hot-cold cycles, what do any of you recommend using as a clear-coat for the clutch and stator covers? Hi-temp powder coating?
I had planned on using Glisten PC on the aformentioned engine covers and I will still can use it on my wheels and fork tubes if heat is going to be an issue with the covers.
I had planned on using Glisten PC on the aformentioned engine covers and I will still can use it on my wheels and fork tubes if heat is going to be an issue with the covers.
F
Flyboy
Guest
Autosol and elbow grease once a week. 
Sorry Stan, but it's gotta be clear-coat or something similar to it. The factory did it that way and if at all possible mine will be the same.
G
Guest
Guest
YES on the powder coating or Ceramic paint coating.
NO on Glisten PC.
I tried it and while I think the product is excellent the alu covers still found a way of corroding UNDERNEATH the clear-coat, so in a year it looked like some dumb-ass clear-coated the parts with no prep. Just answering all the questions, like: "Oh, did you do any prep before spraying that clear?" made me sick...
G
Guest
Guest
The factory did it the way they did so bikes would look good IN THE SHOP and that coating deteriorated fast once on the road...
One such possibility...
http://buster-beaver.com/Cerakote Ceramic Coatings/cccfinishes.asp
http://www.cerakotehightemp.com/resources/HighTempManual13web.pdf (MC series coating application)
.....
The Eastwood engine paint I bought is silicone alkyd based. Hope I don't run into any issues when I go to paint the body work.
http://buster-beaver.com/Cerakote Ceramic Coatings/cccfinishes.asp
http://www.cerakotehightemp.com/resources/HighTempManual13web.pdf (MC series coating application)
.....
The Eastwood engine paint I bought is silicone alkyd based. Hope I don't run into any issues when I go to paint the body work.
Last edited:
G
Guest
Guest
Yup, that's what I went with (on the engine covers) and several years later I am as happy as on day one
