• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Feed stator wires through cover gasket?

  • Thread starter Thread starter littleroot
  • Start date Start date
L

littleroot

Guest
What in the wide world of sports is going on here?

Do I have to pull the stator wires from the harness to feed them through the gasket on the stator cover?

Man oh man. I am very tempted to put a slice in the gasket and avoid this as
I already changed the R/R this year and dang if I want to pull all them wires apart again!

Any tips for this?

Thanks,
-Bob
 
The obvious answer is the only one. I just cut my soldered stator wires and resoldered them for the same purpose. If you are in the habit of swapping stator covers, then use spades :o
 
I am alittle confused on what your asking here, as your stator should have its own wires that feed through a grommet, to the upper right portion (as your facing it) of the cover, then through the starter cover, out the backside (left side of bike out of the starter cover) and then solder directly to the regulator wires. You should not have to route any of the bike's harness through the cover.
 
Yes, the stator wires go through the gasket, if I'm understanding your question correctly.

Your plan of a slice in the gasket should work -- just patch it with a dot of case sealer (preferably not RTV silicone) and it should be fine. Not much oil gets splashed up there.
 
This is apparently different from my bike as the stator wires go through a rubber grommet you can pull the wires through, there is no need to slice any gaskets, at least on an 83.
 
Clone said:
This is apparently different from my bike as the stator wires go through a rubber grommet you can pull the wires through, there is no need to slice any gaskets, at least on an 83.
Click to expand...
Mine is the same way, hence my curiosity...
 
On my stator, the wires had a grommet molded into the wires. You put the grommet in the cover then put the gasket on. No need to cut the gasket.
 
almarconi said:
On my stator, the wires had a grommet molded into the wires. You put the grommet in the cover then put the gasket on. No need to cut the gasket.
Click to expand...


Mine is the same way, I actually have mine off right now. Is there any need for permatex or some form of sealent along with the gasket?
 
You can use sealant if you want. Hylomar or Ultra copper works well. I like to adhere the gasket to the cover so it doesn't move around while installing it.
 
I have never used any sealant on mine, I just oil the gasket, and install it.
 
I was under the impression that the OP wanted to replace the gasket yet avoid disconnecting the stator wires from the bike -- it had nothing to do with the grommet.

To do this, at least with all the GS stator covers I've seen, you would need to cut a slit in the gasket.

The wires go through the grommet and enter a little "chamber" at the top of the stator cover, where they're then threaded through a hole into the starter cavity. You would need to cut the gasket at this "chamber" to install a new gasket without removing the wiring from the bike.

And come to think of it, this chamber doesn't have any oil in it, so you wouldn't need to re-seal the gasket.

The chamber I'm talking about is at the bottom of this photo of a stator and cover from a 1979 GS850.
forsale+-+1.jpg
 
Please click one of the Quick Reply icons in the posts above to activate Quick Reply.
 
bwringer said:
The wires go through the grommet and enter a little "chamber" at the top of the stator cover, where they're then threaded through a hole into the starter cavity. You would need to cut the gasket at this "chamber" to install a new gasket without removing the wiring from the bike.

And come to think of it, this chamber doesn't have any oil in it, so you wouldn't need to re-seal the gasket.
Click to expand...

He may need to seal the grommet though if he ever installs a new stator. I had to hollow out a channel in the grommet to feed my new Electrosport stator wires through. You can see some of the cut here in this pic - http://ravensys.net/sa/bike_newstator.jpg

After trimming enough material away so that the top of the grommet sat flush with the rest of the gasket surface, I shot a bit of red RTV into the channel I carved into the grommet to keep things sealed.
 
Last edited:
bwringer said:
I was under the impression that the OP wanted to replace the gasket yet avoid disconnecting the stator wires from the bike -- it had nothing to do with the grommet.

To do this, at least with all the GS stator covers I've seen, you would need to cut a slit in the gasket.

The wires go through the grommet and enter a little "chamber" at the top of the stator cover, where they're then threaded through a hole into the starter cavity. You would need to cut the gasket at this "chamber" to install a new gasket without removing the wiring from the bike.

And come to think of it, this chamber doesn't have any oil in it, so you wouldn't need to re-seal the gasket.

The chamber I'm talking about is at the bottom of this photo of a stator and cover from a 1979 GS850.
forsale+-+1.jpg
Click to expand...


Right. You explained it well and I'll prove it (or be red faced) by showing the gasket and my cover.

I'm with you: My choices are I have to cut the gasket or disconnect the stator wires and run them through the small cavity. The grommet should keep oil out of the little cavity. To my unexperienced eyes I'd say it's probably what the grommet and cavity are for: to allow us to cut the gasket and slip the wires in there.

Gasket
suzy-maggasket-IMG_2548.jpg


Stator cover
IMG_2542.jpg
 
Could you could remove the starter and slide them through individually ?
 
littleroot said:
Right. You explained it well and I'll prove it (or be red faced) by showing the gasket and my cover.

I'm with you: My choices are I have to cut the gasket or disconnect the stator wires and run them through the small cavity. The grommet should keep oil out of the little cavity. To my unexperienced eyes I'd say it's probably what the grommet and cavity are for: to allow us to cut the gasket and slip the wires in there.
Click to expand...



Exactly. Cut at the black line shown below, and you will be able to replace the gasket without disconnecting the wires.

suzy-maggasket-IMG_2548_cut.jpg
 
There is no need to cut the gasket:hand:
you need to reuse the grommet, so you have to cut the plug off the stator wires to feed them through the grommet. So you also put the wires through the hole that seals around the cavity where the wires go to the starter space. you don't have to remove the starter either. The wires will feed through.
 
Clone said:
There is no need to cut the gasket:hand:
you need to reuse the grommet, ...
Click to expand...

Only if he's replacing the stator. Which he is not, if I understand the point behind all these machinations.
 
You must log in or register to reply here.

Similar threads

S
SH775 wire harness guidance
Replies
5
Views
179
bren
bren
W
Choke Plunger Replacement
Replies
4
Views
119
Wright 83 GS650
W
NotASparky
Trigger Warning: Purists Beware!
Replies
10
Views
208
Big T
Big T
S
Grime in Valve Cover
2
Replies
35
Views
358
rphillips
R
Zellock
That's a Texas GS450T, y'all
2
Replies
23
Views
222
Rich82GS750TZ
Rich82GS750TZ
Back
Top