• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Leaking Head Gasket

  • Thread starter Thread starter Anonymous
  • Start date Start date
A

Anonymous

Guest
For some time, the head gasket on my '82 GS650GL has leaked oil in the area of the 4th cylinder. The upsetting part is that the bike only has 15,500 miles on it.

It has finally got on my nerves and I want to fix it. What is the process I should follow? Should I pull the engine and if so, how does it come out? What special tools may I need? What parts should I replace besides the gasket?

Since I'll have the head off, a valve on the right side of the engine is tapping when the engine is cold so I might as well fix that. The bike also blows out quite a bit of smoke when at moderate to high RPMs. Once it warms up, the tapping goes away and the smoke quits completly. Does that mean the valves need to be redone?

Thanks.
 
no need to yank the engine

no need to yank the engine

I just did my 82 GS850 and had never done one before. I did not need to take the engine out in order to do it. It was crucial to have a manual so I could get the timing chain back in the right position when putting it back together, knowing what the torque settings and tightening patterns were for the bolts etc. I would get a new head gasket, a square o ring gasket that goes in the middle, (the parts place will see it on the diagram, and a new valve cover gasket. I also got some molybednium paste, or "moly paste" at a car parts place, because it was cheaper, since the manual pointed out to put on the overhead “cam shaft journals".
Since my valves needed adjusting I bought a tappet depressor tool. They are about $30.00 and look like they should cost $2.00. A torque wrench is also something to get or borrow. Although I had a manual, I made a mistake and did not reset the cam chain tensioner the first time I put the bike back together. It made quite the whining sound. After posting a question on this forum and resetting the cam chain tensioner it ran purrrrrrrrrfect.
I used the expertise of the kind people that answer questions at this forum and it helped me as I went through my engine odyssey in stages.
I'm sure you will get lots of good advice here.
Good Luck,
Mike Newman
 
Ok. I shot a few pictures. I'm sorry, but I am full of questions. I have replaced the head on a '85 Lynx but never on a motorcycle.

It doesn't look like I can get my sockets in there to remove the bolts without pulling something out. If I don't pull the engine, do I need to take the gas tank off? Where do I get a manual? Where do I get the replacement gaskets?

Looking at the bike from the front:
leak.jpg


A close up of the leaking area:
leak_close.jpg
 
You need to get a manual. yes the tank has to come off, coils and horn possibably also, and the exhaust too, use plenty of penatrating oil on exhaust bolts. I have heard that they like to break. As for gaskets check with your Suzuki dealer or maybe bikebandit.com or DennisKirk.com? check links page for parts sources. Work slow and if you have any questions Take pictures before you take it apart and during for reference
 
Well, the repair is a no-go. After chatting with my dad (the true owner of the bike) and checking on the price of the gasket ($71 from bikebandit) I have decided that I will keep checking the oil. To keep oil off of my pant leg, I will just tuck it into my sock.
 
Twin motos

Twin motos

Wow, we've got (almost - mine's blue) twin bikes, right down to the leak! Thanks for bringing this up - I've been avoiding mine for 3,000 miles, slavishly checking the oil. Good to know what to do when I get to it.
 
I replaced the head gasket and associated o rings and other gaskets on my 79 GS850GN at about 34000 miles. I broke 2 exhaust studs and had a miserable time replacing them. This all for an oil leak. After putting it together it was leaking again in a thousand miles. Just a little. Before taking it apart I'd try one or both of these fixes.
1. Re-torque the head bolts.
2. Clean the leak area well-the head/case joint. Then put some hi temp silicone rubber on the joint, 1/4" or so-maybe more.
Both fixes suggested to me by the dealer mechanic AFTER I did the work.
joe b.
 
I would still do it if...

I would still do it if...

I know the gasket kits are expensive. I liked the comment about re-torquing the head bolts. After I got all done with my 82GS850 it leaked a little bit but not at the head gasket as it did before, but at the base gasket. Anyway I torqued the head bolts in the pattern in the book to about 7 or 8 foot pounds greater than the specification. I have 500 miles on it now and not a sign of a leak.
If it still leaks, do the work slowly over the winter if you can so you are not in a hurry. I was able to do all of the work with only taking the gas tank off, the carbs and the exhaust.
Good luck
Mike Newman
 
Since you are not going to take it apart you may want to retorque the head bolts, may help Here are specs for 850, should be ery close to your requirements
27 ft lbs Make a dia for bolts number them front lable 9 5 1 3 7 11
rear 10 8 4 2 6 12 sequence to tighten bolts, on.
 
You must log in or register to reply here.

Similar threads

dubwicht
Leaking oil at head gasket
Replies
13
Views
199
lizzywhite45
L
S
Psyching myself up for the top end - any veteran eyes up to read borescope pictures?
Replies
16
Views
417
DimitriT
DimitriT
noahjar
GS850L Makeover
Replies
4
Views
83
Nessism
Nessism
T
1980 GS850GT top end rebuild - head machining
Replies
3
Views
113
first timer
first timer
W
Free random parts!
Replies
6
Views
148
wkmpt750
W
Back
Top