SH775 Mounting Options on GS1100E? - Got any photos?

[alke46]

Mine's mounted to the slightly modified tool bag bracket. I never had the tool bag, so it wasn't being used anyway. Not sure what kind of space your're working with.

Rich, where is your fuse holder and starter relay (solenoid)?

I am wanting to mount my SH 775 like yours but man, it is tight in there.

 

[Rich82GS750TZ]

The RR is mounted to a plate that was designated for a tool bag on this model. The Starter solenoid and fuse box are mounted where they’re suppose to be, on a different plate inboard of the toolbag plate. I’ll see if I have a pic. Right now I’m sitting at Wendy’s waiting to pick my kid up at work. No high speed data to search right now. I’ll try when I get home.

 

[alke46]

For location purposes, this is what mine looks like compared to Rich's.

IMG_20200829_195133783 by Larry Alkire, on Flickr

As can be seen, I have a fuse holder, a starter relay and a signal relay where the SH 775 needs to be.

 

[1978GS750E]

Larry, Don't know if the 1978 is the same but here is mine:

Had to make a spacer to mount it squarely and enlarge one side of the mounting holes. It's tight but it will work!

 

[Rich82GS750TZ]

Larry, it looks like Rons setup may be just the ticket for you. I see very little difference between his electrical plate and yours.

 

[alke46]

Thanks Ron and Rich. I'll give it a go tomorrow and will probably have to do some fabricating -- not my strong suit. But it has to get done.


Yes, Ron's picture will also work for my application. Just need to get some aluminum stock for a spacer.

 

[bobtail84]

Here's mine just for another idea.