Valve clearance is way to big

[tom203]

I bought the tool but had problems with buckets on 1 and 4- tool would slip off. Went to zip tie to finish. Assuming you made the right shim size pick, no need to worry about dislodging carbon (and getting bewildered) ,cuz it won't hang around long!

 

[Brendan W]

Yeah, I'll be doing it again as well.

 

[Scout]

No, it actually saves a lot MORE than a $20 bill. I have never had that $20 tool work correctly for me, and it snapped off the side of the bucket when the shim was only part-way installed. The shim shattered, it took about half an hour of fishing through the oil puddles with a magnet to get the pieces out, then another major fraction of an hour assembling the pieces to see how much of the shim was still to be found in the engine. I simply choose to not repeat that ordeal.



Come on, admit it. Do you do EVERYTHING exactly as you were taught in tech school? Surely you have found one or three things that you can do better by doing it a different way.




How long do you plan on keeping your bike (or another 2-valve GS)? How much do you plan on riding it? The manual suggests checking clearances every 3-4,000 miles. Some of us put at least that much on every year, and keep our bikes for several years, so this is not a "twice in a lifetime" event. To add to that, I have four GSes in my own garage that I maintain, along with helping a few others in the area, so it is sometimes a "twice a MONTH" event.

.

I am all for creative solutions to challenging issues. When I was still in the business I had plenty of "specially modified" tools for certain tasks but this zip tie method seems to be a solution where there is no actual problem. So far I have done someone else's bike once and mine twice now and yes it takes a learning curve of a few minutes but have never experienced any shim breakage. The suzuki 2 valve shim adjustment is in my opinion a better experience than the other shimmed bikes from what I remember of my early general training ( I ended up specializing/focusing in H-D tech)


Agree 100% on the valve adjustment comment. I have adjusted mine twice this year, once when I got the bike and after I rang up about 3,800 in a few short months. I think most riders don't ever do it at all and they just ditch them at 20,000 miles

 

[dorkburger]

They use the tie wrap between the valve and the valve seat in order to keep the valve open. That allows them to remove the shim and replace it without any other tools. The down side is it can pickup or dislodge some carbon from behind the valve which, as in this case, cause an incorrect reading of valve clearance. Doesn't effect the engine in the long run because the carbon will get blown away once the engine starts. Just makes it more difficult to ensure you're getting a true clearance measurement.

Now I see. Thanks. As far as zip ties go, ive found that the swap meet cheapo packs seem to suck and break easily.

 

[GSX1000E]

Hmmm.

http://www.z1enterprises.com/ItemDe...alve+Shim+Changing+Tool+Suzuki&item=MP08-0017

 

[GSX1000E]

Effortless. And in over thirty five years I have yet to break a shim. (Must be doing something wrong eh?)







Much EASIER than the nut/bolt 16V style for me anyway.

 

[dorkburger]

.......now I see even better.....Thanks.

 

[cowboyup3371]

I have the tool and trying to do the inside cylinders is very easy with it; however, 1 and 4 are always a pain in the arse to ensure I have the right sideways pressure on it. Fortunately, I have never broken a shim but I do sweat very hard every time it slips off.

I have also seen Steve use the zip tie and it looks very simple, I'm just not confident I can do it as well as he does so I'll still use the tool.

 

[Steve]

Effortless. And in over thirty five years I have yet to break a shim. (Must be doing something wrong eh?)

Much EASIER than the nut/bolt 16V style for me anyway.

Go ahead and pat yourself on the back, I have not been so lucky.

I will agree that it's easier than the 16-valve adjusters.

.

 

[GSX1000E]

I DID have one slap down and squirt a drop of oil into my eye once if that will make you happy.