I recently purchased a 1980 GS550L that seems to idle fine off choke after warming it up and can rev without issue. The problem is that after I ride it a bit and it gets really warm/hot it will not idle. When this happens it can be hard to restart as well, but I have always been able to get it restarted (I did bump start it once since I was at the top of a hill and could not get it to restart using the starter). I have read it could be bad coils, sticking valves, bad rectifier, clogged carb and more. I was wondering if anyone has had a similar issue and how you fixed it.
-
Required reading for all forum users!!!
Welcome!
Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.A note to new registrants...
All new forum registrations must be activated via email before you have full access to the forum.A Special Note about Email accounts!
DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.A note to old forum members...
I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.
Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...
-
Returning Visitors
If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.
If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.
1980 GS550L will not idle when hot
- Thread starter Mfraumeni
- Start date
Hi,
I have not done any of that. I had a mechanic that works on older bikes do some work like new tires, bars (since the stock bars are awful) and to adjust the carbs. He didn't touch the carbs because he said it was running perfect but added some seafoam just in case. Igot it back and it did the same thing. He could not get it to die and asked me stupid questions like if I kept the choke on while riding, but he obviously was not test riding it long enough. After arguing with him and letting him know I am not an idiot he agreed to test ride it again for a longer distance. He did and it died on him once he came to a stop. He charges quite a bit per hour so I was not going to have him dig into it since he thought he was going to have to replace the valves. I posted here because I heard people say they had idle issues caused by the coils when they got hot. I was asking for examples of similar experiences. I can change coils. I do not know how to adjust or replace valves.
I have not done any of that. I had a mechanic that works on older bikes do some work like new tires, bars (since the stock bars are awful) and to adjust the carbs. He didn't touch the carbs because he said it was running perfect but added some seafoam just in case. Igot it back and it did the same thing. He could not get it to die and asked me stupid questions like if I kept the choke on while riding, but he obviously was not test riding it long enough. After arguing with him and letting him know I am not an idiot he agreed to test ride it again for a longer distance. He did and it died on him once he came to a stop. He charges quite a bit per hour so I was not going to have him dig into it since he thought he was going to have to replace the valves. I posted here because I heard people say they had idle issues caused by the coils when they got hot. I was asking for examples of similar experiences. I can change coils. I do not know how to adjust or replace valves.
Nobody knows how to adjust valves when they're born.
Honestly, it's not a big deal to do, even the first time. Second time's a breeze and after that it holds no fears.
There is lots of help here and other places should you decide to do it yourself.
If you want to run one of these older bikes, you really can't afford to pay a mechanic's time to do all the small but essential stuff it needs. It ends up being a money pit. Apart from that, most mechanics these days know next to nothing about any bike older than ten, maybe twenty, years old.
Valve clearances are essential maintenance. Without them being done, it runs like a bag of crap, then gets damaged internally, and the cost of fixing it would put it beyond economical repair.
Honestly, it's not a big deal to do, even the first time. Second time's a breeze and after that it holds no fears.
There is lots of help here and other places should you decide to do it yourself.
If you want to run one of these older bikes, you really can't afford to pay a mechanic's time to do all the small but essential stuff it needs. It ends up being a money pit. Apart from that, most mechanics these days know next to nothing about any bike older than ten, maybe twenty, years old.
Valve clearances are essential maintenance. Without them being done, it runs like a bag of crap, then gets damaged internally, and the cost of fixing it would put it beyond economical repair.
Honestly, I strongly suggest you read the newbie mistakes thread and then ask yourself if you want to own a 40 year old motorcycle. Unless you have a lot of money to pay a mechanic, plus you can find a good mechanic, you are going to have to do the work yourself.
And if you decide you want a mechanic, look for a racer. Not in his 20's. Does he have examples of old, air cooled bikes in his shop? Racers, builders, tuners are the best mechanics (men in their 50's). Does the shop have a dino?
Otherwise, read everything you can. Watch (live or on-line) others doing the work.
Otherwise, read everything you can. Watch (live or on-line) others doing the work.
