Gas tank bolt specs for 1979 suzuki gs850g

[seanarthurmachado]

Hi everyone,

I've decided I'm tired of waiting for 2 weeks and paying 2-5$ plus shipping for bolts.

I need the proper bolt to hold my gas tank onto my 1979 Suzuki gs850g.

The Suzuki OEM part is 01500-03307.

Does anyone know the proper specs (length, size, threads) for this bolt?

The one my bike came with was placed on by a P.O. and was just a standard random US bolt with a rusty washer and a generic rubber gasket on it.

I'm hoping to be able to just swing by a hardware store and pay 1-2$ for the bolt.


Thanks

sean

 

[Guest]

If it was a standard bolt likely the thread is ruined. There is a spacer with two very specific rubber washers in there, you might want to actually order the OEM one for this, or put a wanted ad up on the site.

 

[seanarthurmachado]

I already purchased the washers, standoff, but I forgot to order the bolt itself.

 

[tkent02]

It's just a bolt, anything close to the right length will work.

 

[Steve]

I was going to say that the bolt size is usually encoded in the part number, but your number did not look right. :-k

I looked it up, and sure enough, there is one wrong digit in what you typed. It is 01500-08307.
Look just after the hyphen, you will see that it is an M8 bolt that is 30mm long.

.

 

[Guest]

Is that how all the bolt part numbers are done? I've always wondered how to tell the bolt size.

 

[Guest]

Is that how all the bolt part numbers are done? I've always wondered how to tell the bolt size.

Nearly always most of the time. Not quite a 100% but nearly almost every one.