Im assuming the tank lining is a "General" item

[Hammered]

Ok, I have a sweet tank for the 650 coming that will require no mods to fit. It was for a good price IMO ($50) damn shipping for Canada is a killer though. Ill have to pull a bunch of dents from the area where it looks to have been the victim of some tank slap. After Im done, Ill need to reline the tank. Whos gots the best liner out these days. Used to be POR but thats been a few too many years ago.

 

[Big T]

It's still POR 15 by consensus

It's all in the prep work, don't skimp on that

 

[Guest]

I just did the POR job and it states very clearly it's good for all modern fuels including ethanol blends.

As Big T said, prep work is everything. Don't scrimp on the prep work!

 

[gs1000emt]

I am torn between Caswell's and POR-15.

 

[mike_of_bbg]

I'd try POR-15 if there are no leaks. If leaks already exist, use Caswell.

 

[Nessism]

I'd try POR-15 if there are no leaks. If leaks already exist, use Caswell.

I agree with mike. Caswell's epoxy is quite thick and will fill voids better.

Regardless of what ever method someone chooses I strongly advise that the tank is derusted to the best of your ability before lining. Rust is like cancer and will spread unless eliminated, or at least greatly diminished and sealed over. A quickie derust job is to be avoided if you want the job to last.

 

[1_v8_merc]

Steel is all the liner that I need!
As long as you keep fuel in it, and don't leave it there too long, it will be fine.

But hey, that's just me.
Problem is, there is so much ethanol in the fuel today, it rusts the tanks and clogs the carbs 10x faster.
(which is why I remedy it with some marine stabil)

 

[sparki]

i read on here all the time about people lining their tanks... is that a US thing or is your fuel/tanks make from something different to the UK? just curious an' all as in the UK it's avoided as much as possible... just more crud to block jets and get into the motor. if the tanks clean inside, like has been said, keep fuel in it and it'll be fine.... it it's rusted then get it cleaned out.... just my 2p worth but personally, i hate lining a tank. i see no reason for it to be honest

 

[Nessism]

i read on here all the time about people lining their tanks... is that a US thing or is your fuel/tanks make from something different to the UK? just curious an' all as in the UK it's avoided as much as possible... just more crud to block jets and get into the motor. if the tanks clean inside, like has been said, keep fuel in it and it'll be fine.... it it's rusted then get it cleaned out.... just my 2p worth but personally, i hate lining a tank. i see no reason for it to be honest

So please share how you "...get it cleaned out".:?: I'd love to learn the UK's magic method.

 

[JEEPRUSTY]

I think the problem with rusting is that it opens up pits that increase surface area and therby accelearte the rusting process.

High sulphur content fuel would lead to rusting problems.
Gas varies form place to place. Maybe the Euros have stringent rules on the content of corrosive elements in fuel.

Then there is the group that leave a tank par filled with moisture laden stale fuel. A recipe for disaster. I have had tanks that have lived all their lives rust free because of care taken to keep them dry.

I resorted to drying and bringin them in the house in winters to control the humidity. That may be seen as extreme though.

Many of the folks on here who have de-rusted a tank have started with hideously rusted things that were clearly in need of it. Filled with flaking rust and such.

I think once cleaned and then properly maintained a tank would be fine.

Of you folks that have sever tank rust how many live near a great salt sea?

 

[mike_of_bbg]

Once it gets bad you're fighting a losing battle - especially if it's perforated already.

Kreem has a nasty reputation for cracking/peeling with oxygenated fuels, so I wouldn't let the stuff near my bike. POR-15 I have no personal idea, though it has a much better reputation. But I can't imagine Caswell ever causing such issues.

 

[Guest]

i read on here all the time about people lining their tanks... is that a US thing or is your fuel/tanks make from something different to the UK? just curious an' all as in the UK it's avoided as much as possible... just more crud to block jets and get into the motor. if the tanks clean inside, like has been said, keep fuel in it and it'll be fine.... it it's rusted then get it cleaned out.... just my 2p worth but personally, i hate lining a tank. i see no reason for it to be honest

Keeping the tank full cuts down on rust build-up by reducing the amount of atmosphere in the tank. During the course of daily expansion and contraction, condensation will eventually build up on the bottom of the tank. Also, the bigger the differential in daily hot and cold temps and high humidity levels can greatly increase the amount of this moisture build up.
Ethanol gas doesn't help either, starts breaking down and going into it's phase separation after two weeks. An additive that allows fuel to mix with the water helps (most contain alcohol but some have mineral spirits which I try to stay away from). Keeping fresh gas in the tank helps (riding the bike enough to always have fresh fuel in it). I also run it in reserve for short periods hoping to get that water run out of the bottom of the tank.
Anyway, that's my .02 cents.

 

[rustybronco]

Because I'm too lazy to flip the lever, I always run it on reserve.

 

[1_v8_merc]

I would use a tank cleaning acid to remove all of the Rust, or use Electrolysis.

Then spray WD-40,PB Blaster or Olive Oil all over the walls to stop the flash rust, as you re-assemble the petcock,etc.

Then dump some fresh gas in the tank and swish it around real quick.
Then drain it out of the petcock, then fill the tank up again with fresh gas and Fuel Stabizer.


Having a little flash rust is perfectly fine, most of it should go away after a few fill-ups and riding.

 

[mike_of_bbg]

It's a good thing your GSes have a fuel gauge

Because I'm too lazy to flip the lever, I always run it on reserve.

 

[sparki]

So please share how you "...get it cleaned out".:?: I'd love to learn the UK's magic method.

nowt to do with magic I'm afraid to report..... just get it chemically dipped into some nasty chemicals and it comes out sparkly.... ?30 and it's good as new. paint on the outside is unaffected

this place, for instance, do a first class job

http://www.paint-strip.co.uk/

hope that helps..... but there again, i'm sure you knew about the process already

 

[Hammered]

Thanks guys. The tank in question will be cut and have a modern sportbike filler port added. I like the look. Ill have to do a little searching and pick up one from one of those silly stunters who cant seem to keep both wheels on the ground. And since my riding season will have to wait til next season, Orthopedic surgery, Ill have to temporary treat the tank til then.