• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

New member GS750

  • Thread starter Thread starter Gaz78GS
  • Start date Start date
G

Gaz78GS

Guest
Hello all!

I have a 1978 GS750 which is a US import. It has wire wheels and a single front disc brake. I've owned it since 1996, but took it off the road in 1998 to restore. However, in 1998 I found a rare KR250A and my money all went on that, the GS being confined to the garage where it has stayed ever since!. To cut a long story short, the KR is now gone and I want to get the GS back up and running. Looks like I've got a lot of forum reading to do to catch up!!!

DSC_0001.jpg
 
I knew there was another GS hiding in someone's garage somewhere! If the seat is original you can get a new seat cover from Pitreplica. Check out Basscliff's website for info and tutorials on a lot of the other items that will be needing attention. Congratulations on getting another one back on the road.
 
Thanks!

Not a runner yet, needs quite a bit of work. The front brake hoses are from a custom model, the front fender is not original as that one rusted right through back in the 1990s. Apart from that and the Motad 4-1 exhaust, the bike is complete. Pistons are not seized as they all move on the kickstarter. I did run it for 2 years before taking it off the road.

Seat base is bad, but have just got hold of a Giuliari seat for the bike.
 
I'm currently restoring one like that one. Mine is an E model. I really like that Motad 4-1 exhaust system. Oh well...something else to buy! Does it ever end???? Good luck with the rebuild!
 
Nice bike! Get those carbs cleaned with new o-rings/gaskets/float needles, upgrade to a Polaris # 4012941 "SH-775" regulator-rectifier, add the popular ignition coil relay modification.
Then the running gear.... 98-99 Honda CB600F "Hornet"/"599" rotors, Dan aka Salty_Monk's twinpot brake upgrade with some GS750E or GS650 dual disc fork lowers (or 98-99 CBR900RR 310mm single rotor on your forks and a GS500E/F master cylinder). Chop as many coils out of the fork springs as you can while still having about 4.75" of gaps in the coils & shim the missing portion back up with pvc/copper/aluminum/steel tubing (or just buy some sonic springs), mikesxs.com cartridge emulators or racetrack gold valves in the forks with OEM or AllBalls new fork seals. Then get at the very minimum some YSS E-302 model RE302-335T-01 alloy body rebuild able shocks. Then shod those rims in a 4.00x18 or 110/90-18 rear tire and a 90/90-19 or 100/90-19 front tire. PirellI Sport Demons for the ULTIMATE grip. Bridgestone Battlax BT-45 for similar grip but slightly longer life on the rear tire if you ride straight flat roads primarily. Shinko 230 TourMaster front if on a budget and wanting ultimate grip. Avon AM26 RoadRiders if you do a lot of straight road riding and load on lots of long miles.

That with a Giuliari GS750 seat (I'm jealous!) will make an incredible incredible performing vintage bike!
 
Also...adding some Wiseco K844 pistons and some .354" or .365" lift or so aftermarket cams and valve springs with a good valve job, & a 530 chain/sprockets conversion will make that bike a real screamer!

Don't forget the basics lIke clean clean clean carbs with new o-rings and gaskets, & a proper valve adjustment with a new top cover gasket and half circle cam bore end seals...

These bikes are wonderful & very classy. I'm glad another is getting due respect...
 
Last edited:
My bike needs a LOT of work just to get it roadworthy again. What with my mobility issues, and complete lack of budget, modding the bike will just have to wait. It has sat for 20 years in my garage, and the bike is complete; the plan was to just try and get it going again for now. Had a mini clean-up last weekend which showed me just how much needs doing. Can't decide whether to keep it or sell it! My days of messing with bikes may well be over. Just want a bike I can use these days... My heart is in it but my body says no!!!
 
We call that one the '77 model over here. Be careful, the carbs on the earliest models had a few different configurations. Make a note of what's in there before farting around with it.
 
John, the Suzuki decal on the frame states date of manufacture 12/77, so would that be a 77 or 78 model year? I was assuming it was a 78 due to the color scheme. The paperwork I have doesn't give a model year as it states it was imported into the UK in 1993. I would only be cleaning carbs and replacing O-rings if I took the carbs apart.
 
That would make it a '78 but again the early ones were a little different. The wire wheels and single disk up front usually means '77 but.......
Other's will chime in here shortly.....
 
Lost the photos due to Photobucket being robbing b******s, I closed my account! Not much point having it if I can't post any more pics without paying first!
 
Welcome!

Bummer about the PB thing...looking forward to seeing pics. I dig 750s.

Ed
 
Post deleted due to mistake with pic link. Will repost when sorted!
 
Last edited:
Nice bike!

Single front disc...and rear disc? My '82 750T came with rear drum. Great lookin' bike!


Ed
 
Bike hasn't been on the road since 1993, just stored in my garage with the intention of restoring it. Best laid plans and all that...

Brake lines are from the custom model GS as they were the only ones I could get way back then. They now need replacing so will get the correct lines. Front fender is a universal replacement one as the original had completely rusted through. The original seat pan was like swiss cheese so found a Giuliari replacement at a bargain price (always preferred the look of them!). It's more comfortable than the original too.

Not up and running yet as I have been quite lazy restoring it!
 
You must log in or register to reply here.

Similar threads

gtem
Back in the GS fold (a familiar '81 850G)
Replies
5
Views
153
wazz
wazz
SkunkMeister
New Member, Old Bike
Replies
8
Views
160
1978GS750E
1978GS750E
K
New member from PA
Replies
4
Views
71
Rob S.
Rob S.
6
Mikuni carb choke plunger bobbins
Replies
1
Views
74
Big T
Big T
M
New to the Forum.
Replies
6
Views
114
Syd
Syd
Back
Top