• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Progress!!! 1978 GS1000E Restoration/Performance Rebuild

The paint turned out BEAUTIFUL!! Hopefully, engine parts back to you by the end of next week. I just have to clean, reassemble & bench shim the head. I would like to ride this one after it is done to see how it pulls!
Ray.
 
Here's some progress on the engine cases:

Blasted everything with XL grade Armex soda
Washed the cases with Simple Green and a cold water pressure washer
Blew out all ports and bolt holes with compressed air

Engine cases right after blasting:
IMG_0922 by Anthony Monteleone, on Flickr

Everything washed
IMG_0926 by Anthony Monteleone, on Flickr
IMG_0925 by Anthony Monteleone, on Flickr
IMG_0927 by Anthony Monteleone, on Flickr
IMG_0924 by Anthony Monteleone, on Flickr


Ready for final masking, priming, and then painting!
 
Last edited:
Great work.
Interested to see what paint you are going to use?

As others have said it will be a real head turner.
 
Arronduke said:
Great work.
Interested to see what paint you are going to use?

As others have said it will be a real head turner.
Click to expand...


Plan is to wipe down everything with acetone and then prime with VHT gray engine primer and then paint with VHT universal aluminum engine paint. After everything air dries for a couple days I will bake everything at 200F for an hour.
 
Looking nice. Lots of work there. Can you tell me why you're using the shaft drive clutch? And how many plates are you going to be using in it? And apart from shaving it down and heavier springs in the back, have you needed to do anything else?
 
Wraith said:
Looking nice. Lots of work there. Can you tell me why you're using the shaft drive clutch? And how many plates are you going to be using in it? And apart from shaving it down and heavier springs in the back, have you needed to do anything else?
Click to expand...

When subjected to larger amounts of power, the fingers on the stock 1000 basket can shear off - the solution is to take a 1100 basket and cut it down to the height of the 1000 basket and have a heavy duty backing plate/springs installed with welded rivets.

The number of steel/fiber plates remains the same as the OEM clutch - I will be using fibers from Fast by Gast and I will reuse the stock steels (I will verify their flatness and bead blast them). As for the pressure plate springs, I will use 3 OEM springs and 3 EBC springs - this was suggested to me by my head builder, as it will provide a good clutch feel and more than enough force to lock up the clutch.
 
Cheers for that. I've got in my GS1000G a heavy duty backing plate/springs installed with welded rivet. Was using all six H/D pressure plate springs, but you needed a forearm like Popeye, so did the same and used 3 and 3 and works very well.
Now doing my chain drive GS1000 with a similar sort of thing - 1100cc kit, CV ported head to suit Bandit 1200 carb rubbers with GSXR 36mm CV carbs, APE brass valve stems, H/D valve springs, MTC under bucket shims and Andersons S3 cams, etc.
Standard clutch not given me much trouble, but it could be better - does start to slip under heavy load.
 
Last edited:
That sure is a lot of paint. Any concerns that it won't inhibit the cooling?
 
rudeman said:
That sure is a lot of paint. Any concerns that it won't inhibit the cooling?
Click to expand...

I used several thin coats instead of heavy ones to ensure good coverage and prevent runs - I see air cooled engines that are powdercoated, which is substantially thicker than paint and they don't seem to have any issues.
 
The extra paint won't hurt, maybe if you're stuck in traffic in Texas in summer
 
You must log in or register to reply here.

Similar threads

philosopheriam
1997 Ducati Monster 750 Dark, not a restoration, just a fixer upper...
Replies
14
Views
2K
philosopheriam
philosopheriam
philosopheriam
RS34 Tuning Assistance (related to philosopheriam's 1978 GS1000E restoration)
Replies
0
Views
107
philosopheriam
philosopheriam
philosopheriam
Framecrafters is done with my frame - yipppeeee!!!!!!!!!!!!!!!!
2
Replies
28
Views
4K
philosopheriam
philosopheriam
philosopheriam
1978 GS1000E mild performance build (thanks rapidray)
2
Replies
25
Views
2K
blowerbike
blowerbike
Back
Top