-
Required reading for all forum users!!!
Welcome!
Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.A note to new registrants...
All new forum registrations must be activated via email before you have full access to the forum.A Special Note about Email accounts!
DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.A note to old forum members...
I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.
Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...
-
Returning Visitors
If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.
If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.
what did you wrench on today??
- Thread starter chuck hahn
- Start date
I did take advantage of time away from work though, finally making this bed slide. No more climbing in and out of the truck for bigger things. Sure miss working out of a van but the transmission crapped out and this truck kinda fell into my lap.
20230102_133251 by burque_73, on FlickrI was going to use casters but found these little ball bearing rollers at Harbor Freight for $2ea. Supposedly they're rated to handle 100lbs each. Used 20 on the bottom and ten up above.
I built the side boxes a while back and they have worked out great. Maybe tomorrow I'll build some smaller compartments for tools and supplies.
20230102_171442 by burque_73, on Flickr
On the last two I had, the transmissions died with spectacular noise at around 100k miles. Thankfully they were company vans, not mine. I just moved into my second Transit 250. The first one did 145k with only regular maintenance needed.
My last 2 bikes had custom suspension so I knew this bike could be so much better (the rear shock was really soft. On this bike I got lucky: there were 2 models of Daytona offered that year, the expensive one having an Ohlins shock that sells for a lot of $$$, and the cheaper one having a 'Triumph' (KYB?) shock, but still fully adjustable with high and low speed damping, plus a stiffer spring than the Street Triple. Most people don't realize that so it sells for cheap on eBay. I basically got a $1000 shock upgrade for $80. Now the bike feels rock solid and I ride it with much more confidence.
After recently doing the valve shimming, throttle body balancing, and timing adjustment, this bike is incredibly smooth with an addictive sound, and fun to ride.
Man, you have a good memory.
That E250 treaded me well while I had it. Unfortunately sold it and bought an F350 puckup. Big mistake! That truck, even after suspension upgrades, would rattle your teeth loose. Sold the F350 and bought a very used Ram B3500 van and that's what left me stranded. Back to a Ford truck.... for now at least.
On another note, I received my Shinko tourmasters for the GS. Soon, when the sun is warm enough to soften the rubber a bit, and I have time, I'll get them mounted. Looking forward to riding more this spring.
IMG_20230213_165537462 by Larry Alkire, on Flickr
IMG_20230213_165733019 by Larry Alkire, on Flickr
IMG_20230215_153222817 by Larry Alkire, on Flickr
IMG_20230215_153222817 by Larry Alkire, on FlickrFine German engineering my azz
The link cable stretches and you need to re-balance. There is a lot of advice about the balancing procedure involving temperatures, fans, carbtunes on and off idle.
So I'm thinking that, if after all that measuring, all you do is take slack out of the link cable, why not do it anyway and see if things get better.
Thirty seconds and half a turn of the adjuster later and the bike runs a dream
Speaking of which. My 96 R1100R had a surging issue at low throttle. The cable goes to the left and a second runs over to the right which has the single TPS.
The link cable stretches and you need to re-balance. There is a lot of advice about the balancing procedure involving temperatures, fans, carbtunes on and off idle.
So I'm thinking that, if after all that measuring, all you do is take slack out of the link cable, why not do it anyway and see if things get better.
Thirty seconds and half a turn of the adjuster later and the bike runs a dream
Reminds me of the one-plug-lead-off at a time to balance the old boxers. However, those incautious enough to try it with electronic ignition fitted had to be very careful to carry a spare plug and ensure a good earth path on the dead plug side.
I've no doubt the manual at the time was full of pointless steps, too.
replaced starter motor in Tacoma
got 23 yrs out of original so worth the pain-in-the-a$$ it was I guess
youtube saves the day again
It's a Tacoma. Did you figure out why it failed so soon? Lol.
Nice to see you on this site, Mario.
I am a long time member on the CB1100F site.
Great looking ST.
jacko
Forum Newbie
guy I bought it from had put on some cafe handlebars that I wasn't really into. back to stock now:
before photo
Attachments
While new gasket and half moons are coming, checked and set the shims to spec. One valve too tight, one too loose, six within spec, but mostly a bit on the tight side (0.04mm). Three were at 0.07mm, so left them alone. I had a good enough assortment of shims in my shop for most adjustments, but did have to visit my local Suzuki dealer to get one other shim, happily exchanged, with no cost to me.
I have already been accepted fo Collector Plate for this bike, so maybe in a month, when the winter sand gets swept from our roads, I get to ride. Already took it up our street to verify that everything works.
