Chain tention drag bike

[sprout]

Been working on my bike to get ready for this weekend. Chain seemed very loose to me, so I tightened it a bit. I'm wondering how much up and down movement you guys run on your drag bikes? Running a slick and WOT launch also. Thanks for your help, sprout

 

[rapidray]

About 1/2 - 3/4 inch up & down movement is good. This doesn't mean a HARD push to get that, but a LITTLE pressure. Ray.

 

[Agemax]

you are racing your bike on a drag strip and you dont even know how to tension a chain correctly?????? do you know how to set up your engine correctly?

 

[sprout]

Thanks Ray, that's is right where I set the chain. The reason I started this post is for the fact I read someone else's post and it sounded to me that they ran the chain very loose. No harm asking. Tell someone like AGEMAX has a dushbag comment and recks what the ask forum is all about helping others.

 

[81gs1100]

Agemax... 80% of riders problably don't know the "correct" way to do a standard adjustment, let alone the adjustment of an altered bike. Asking opinion of others how they do it is a very modest thing to do, I would rather ask someone, then guess Im doing it right and wreck something later. I run my chain at about an 1" slack with an 8" swingarm because it felt right, but maybe as I have no rear suspention I could tighten it up a bit more.

Comments of those like Agemax need to be removed as soon as seen as its only going to make people afraid to ask questions.

Edit: Besides there isn't a "Manual" for drag racing, (well, unless Ray wrote one) Its all bout asking what your peers are doing, asking everyone what and why they do the things they do or why and how they set up thier bikes. If you can't ask a fellow racer what psi they run, you'll never improve your setup, and vise versa. DOn't make someone feel dumb for asking questions...

 

[Agemax]

all i am saying is he wants to go drag racing but he doesn't know how to tension his chain? what does he know about setting up motors, and carbs, and tire pressures??????? the guy shouldnt be allowed on a road let alone a drag race track

 

[81gs1100]

SO instead of helping him you belittle him with the comment you posted? What does the motor, carbs and tire pressure have anything to do with it? The motor runs, has a contained breather, thats all that you need to race, carbs, are they leaking, have a positive return spring, the tires, do they have air in them? Go racing! The techs will point out any issuses they see, thats why they are there. He was simply asking what slack he should run, if he ran a 1/2" or an 1 1/2" Im sure it would be ok, but he asked for a second, or maybe 3rd opinion. Im sure he is pretty new to racing so he's asking questions, HELP him, don't scare him or make him feel stupid, thats all Im saying. Its comments like yours that cause more damage then good, and can lead to a more dangerous outcome as your comment could keep him from asking other important questions. He is a better way.

Agemax: Sorry I don't know the correct way to set the tension on your bike, but insead of making a smart ass comment, ask around someone will be able to help. By the way, Hows everything else running, any motor mods? Gear changes? Let me know how your weekend turns out, if there is anything I can help with I will help.

But you failed Agemax. If you cannot answer or help find the answer, maybe you shouldn't post a comment.

 

[Agemax]

he didnt even post if he was running shocks or struts. makes a hell of a difference

 

[81gs1100]

he didnt even post if he was running shocks or struts. makes a hell of a difference

So why didn't you ask him?

Instead you make a rude comment.

 

[Agemax]

it wasnt rude it was a straight forward answer. FFS would you let your kid out on the road on a bike that he didnt know how to maintain, let alone a drag strip

 

[81gs1100]

would you let your kid out on the road on a bike that he didnt know how to maintain, let alone a drag strip

YES!!! I would, and I have myself. Except if I had a kid I would build him a super comp Jr Dragster Those are bad as hell.

 

[cowboyup3371]

all i am saying is he wants to go drag racing but he doesn't know how to tension his chain? what does he know about setting up motors, and carbs, and tire pressures??????? the guy shouldnt be allowed on a road let alone a drag race track

I think I understand your point in that if someone is racing you'd hope they'd know something about their bike first.

However, where would someone learn this stuff Agemax? They don't teach you how to adjust your chain or perform a basic oil change when going through the MSF course. Heck, I'd say we're fortunate most states require some sort of training to get the endorsement but it's still not mandatory here.

I didn't know anything about maintaining a motorcycle when I first bought mine except that I should change the plugs and oil. But I asked questions and learned from folks - it's the right thing to do. And you know what, even after doing that I found I was doing some things wrong. Only by making the mistakes, asking more questions, and having someone show me have I learned how to do it the right way.

But if I was to follow your line of thinking I should never have gotten on a motorcycle much less behind the wheel of a car.

 

[sprout]

Thanks for the back up guys, I have been on other forum type websites and have stopped going on them because of people like AGEMAX he will distroy what this site is all about. My father has over 40 years of metalwork experience him and I did post a ton of info on a site called metal meet.com people like AGEMax posted stupid opinion and only hurt the people that wanted the info and would do something with the info. AGEMAX is someone that has nothing and will never have anything so being a dick to others makes him feel tough.

Oh by the way I took 2nd in a gambler race out of 33 cars and bike box and no box race how you like those apples?????

 

[81gs1100]

I see it says midwest, where do you race at Sprout?

 

[Agemax]

Thanks for the back up guys, I have been on other forum type websites and have stopped going on them because of people like AGEMAX he will distroy what this site is all about. My father has over 40 years of metalwork experience him and I did post a ton of info on a site called metal meet.com people like AGEMax posted stupid opinion and only hurt the people that wanted the info and would do something with the info. AGEMAX is someone that has nothing and will never have anything so being a dick to others makes him feel tough.

Oh by the way I took 2nd in a gambler race out of 33 cars and bike box and no box race how you like those apples?????

you know nothing about me and for your information i have a lot more than you ever will!

 

[sprout]

81gs, I race at BIR and Rockfalls. AGE tell that to your shrink today when you pay them to listen to your BS.

 

[Agemax]

why are you getting so upset over 1 comment. you need to GROW UP if you want to get on in life.
oh, and sending childish derogatory private messages to people isnt going to help you get any friendly help either!

 

[sprout]

AGEMAX, I'm done wasting time on you. Stay away from my posts and we will all benifit.

 

[rapidray]

Sorry agemax but YOU are the one looking like a jerk in this. If you read the other posts, MORE than 1 person thinks so too. Ray.

 

[rapidray]

Het Sprout, My # is 714--356-7845. If you ever have a question & don't want to deal with idiots & their comments feel free to just call me. If you get my voicemail, leave a message & I'll call you back. Ray.