Looking good! 
Happy New Year!
Happy New Year!
-
Required reading for all forum users!!!
Welcome!
Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.A note to new registrants...
All new forum registrations must be activated via email before you have full access to the forum.A Special Note about Email accounts!
DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.A note to old forum members...
I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.
Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...
-
Returning Visitors
If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.
If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.
Suzuki GS1000e/s/gs1100/gsx1100 project...
- Thread starter bobtail84
- Start date
Looking good!
Happy new year Dan.
If you haven't already... I'd re-solder that fuse box & then "pot" it with Araldite. I had problems with a couple of them over the space of a couple of years but none since I did that on one about 8 years ago
If you haven't already... I'd re-solder that fuse box & then "pot" it with Araldite. I had problems with a couple of them over the space of a couple of years but none since I did that on one about 8 years ago
Thanks for the tip Dan as I have not done that yet..
I have made a late night purchase....
I have sent the hubs to a wheel builder and after a lot of serching and reading on this forum I'm going for 2.5 X 18 front and 4.25 X 18 rear aluminium rims.
I have looked at and read all the info by Sharpy, Storm 64 and Chuck78 and the detail is fantastic, all the work was done for me so all I had to do was decide what sizes I wanted.
When the wheels are back I will post up pictures.
I have sent the hubs to a wheel builder and after a lot of serching and reading on this forum I'm going for 2.5 X 18 front and 4.25 X 18 rear aluminium rims.
I have looked at and read all the info by Sharpy, Storm 64 and Chuck78 and the detail is fantastic, all the work was done for me so all I had to do was decide what sizes I wanted.
When the wheels are back I will post up pictures.
I have made a late night purchase....
I have sent the hubs to a wheel builder and after a lot of serching and reading on this forum I'm going for 2.5 X 18 front and 4.25 X 18 rear aluminium rims.
I have looked at and read all the info by Sharpy, Storm 64 and Chuck78 and the detail is fantastic, all the work was done for me so all I had to do was decide what sizes I wanted.
When the wheels are back I will post up pictures.
Yes, some good discussion back then. Private message me if you have any questions. (R.I.P. Sharpy)
You'll love what the 18" front does for turning! You mentioned emulators being used in the front end. What shocks are you using in the rear? There are many video's of adventure touring people using sealants and a type of 3M tape to get rid of the inner tubes on spoked wheels. I am going to try it when I get my mojo working. It's worth about 4.5 lbs of unsprung weight per wheel. My GS1100 is set up like this and I really want to try it with no tubes. 4+ lbs per wheel will make a big difference. I'll try to find the link. Here's a link. https://www.youtube.com/watch?v=YPG8buNvTCc
Last edited:
I like the idea of the tubless conversion and I am going to give it a go, thanks for the link.
LarsKroghStea
Forum Mentor
Cool! Was it hard to find the rear hub? I bought one some years ago, and it took some searching.. I went with 4.25X18 rear and the original 19" in front. Lately I've switched to 3.5x19 in front and a GSX-R fork and the 4.25 rear matches that nicely.
This is what it will look like with a 150 tyre, but you are maybe going for 160?
Cool! Was it hard to find the rear hub? I bought one some years ago, and it took some searching.. I went with 4.25X18 rear and the original 19" in front. Lately I've switched to 3.5x19 in front and a GSX-R fork and the 4.25 rear matches that nicely.
This is what it will look like with a 150 tyre, but you are maybe going for 160?
The Hubs are quite scarce in the UK so when I saw this pair I snapped them up sharpish.
I am going to fit a 160-60 18 in the rear & 110-80 18 on the front.
LarsKroghStea
Forum Mentor
That's gonna be awesome
I see you did the 530 conversion, and that'll give you a lot more space. When I researched for my 520 conversion I found that D.I.D (witch I see you bought) was the best in terms of width/strength. I'll send you some measurements later today, but I can say that the only thing that gave med problems was the support arm for the rear caliper. The round one that runs from the caliper to the front of the swing arm. I haven't sorted that out yet, I've just replaced it with a flat bar mounted on the outside of the mount points to make some more room for the tire. I haven't gotten around to research what solution others have found for this. If anyone knows, please post here, or in my thread. I guess both of us are interested in tips on how to solve this. I've thought about just bending the old one, as you don't apply that much pressure at the rear, but I don't know how much momentum the rear brake generates and if this could make the tube bend further.
Update time..
The wheel builder has sent me some pics of my completed wheels which he has boxed up and posted, they should be with me at the weekend.
I have also had the tyres delivered as well, they are Dunlop sportmax alpha 13. The rear is 160/60 ZR 18 and the front is 110/80 ZR18.
The wheel builder has sent me some pics of my completed wheels which he has boxed up and posted, they should be with me at the weekend.
I have also had the tyres delivered as well, they are Dunlop sportmax alpha 13. The rear is 160/60 ZR 18 and the front is 110/80 ZR18.
Hi Lars, thanks for sending me the measurements, they are a great help.
I am working on a torque arm solution using 7mm thick flat aluminium bar with slight angled bends, I will put up pictures when I have a working solution. As I am fitting a 160 on the rear I was aiming to keep the inner edge of the torque arm flush with the inner edge of the swinging arm. My thoughts on whether the torque arm will bend under breaking is I don't think it will due to the fact the caliper mount is held on the wheel spindle and will be held tight by the nut on the spindle which reduce the risk of it moving, the torque arm should not be under massive pressure under braking also the rear brakes are more likely to lock up the wheel before bending the arm, I will report back what I find.
LarsKroghStea
Forum Mentor
This is going to be awesome!
Dave,
That has defo crossed my mind, I am building the wheels up at the weekend so I will offer the wheel up and see where we go from there.
Up date time..
The wheels have been built up and balanced.
I've also found and puchased a pair of marzocchi strada shocks which are in very good condition
They look very nice on the bike.
All in all I am very pleased with the end result.
The wheels have been built up and balanced.
I've also found and puchased a pair of marzocchi strada shocks which are in very good condition
They look very nice on the bike.
All in all I am very pleased with the end result.
melchiro
Forum Apprentice
WOW,
Your bike looks awesome!! Well Done with your project.
Those Dunlop tires seem to be the Sport Version type.
I looked up those tires, here in the USA, seem like Dunlop America, does not sell those Sportmax Alpha 13 tires here, let alone any, "Sport" version in an 18" size.
Again, Great Job.... Do you see any, "Track Days" in the future?
Regards,
Mel
Your bike looks awesome!! Well Done with your project.
Those Dunlop tires seem to be the Sport Version type.
I looked up those tires, here in the USA, seem like Dunlop America, does not sell those Sportmax Alpha 13 tires here, let alone any, "Sport" version in an 18" size.
Again, Great Job.... Do you see any, "Track Days" in the future?
Regards,
Mel
Hey Mel,
Thanks for your comments as the bike has been an ongoing project for nearly 10 years.
I know Dunlop have stopped making the Sportmax Alpha13's and they have been replaced by Alpha14's, I know they are available in the UK and Europe but I would be suprised if they are not available in the States.
As for track days I was at one in May and the next one is on the 1st of July.
Thanks for your comments as the bike has been an ongoing project for nearly 10 years.
I know Dunlop have stopped making the Sportmax Alpha13's and they have been replaced by Alpha14's, I know they are available in the UK and Europe but I would be suprised if they are not available in the States.
As for track days I was at one in May and the next one is on the 1st of July.
