W
wirelessguy
Guest
Hey guys,
I've still got to clean things up a bit but figured I'd share some shots with the group.
I stripped the old crusty job off the side panels on my 1100E and sanded down just a bit. I did have some issues with the red paint originally not taking dark enough so I had to start over with a primer coat.
Primer was cheap walmart can but the paint colors are by Dupli-color.
I've got to say that I was pretty impressed by the new (simple) flat nozzle, sort of like on pressure washers. Applying paint uniformly was actually pretty good.
I've still got to work on the badging and cleaning up some small spots but overall I'm somewhat happy with my first ever attempt here.
Process I followed:
tapped middle off to keep from getting painted and put three rows of striping down, then removing the center stripe.
Painted black on first.
Then I masked over the black, removed the stripes and covered over the black pinstripe while laying down the red coat.
I've still got to clean things up a bit but figured I'd share some shots with the group.
I stripped the old crusty job off the side panels on my 1100E and sanded down just a bit. I did have some issues with the red paint originally not taking dark enough so I had to start over with a primer coat.
Primer was cheap walmart can but the paint colors are by Dupli-color.
I've got to say that I was pretty impressed by the new (simple) flat nozzle, sort of like on pressure washers. Applying paint uniformly was actually pretty good.
I've still got to work on the badging and cleaning up some small spots but overall I'm somewhat happy with my first ever attempt here.
Process I followed:
tapped middle off to keep from getting painted and put three rows of striping down, then removing the center stripe.
Painted black on first.
Then I masked over the black, removed the stripes and covered over the black pinstripe while laying down the red coat.
Last edited:
