B
BadMonk
Guest
I installed new aftermarket turn signals to all four positions. They are single filament, two wires, 12v/23w bulbs. In other words, they basically match the OEM signals. I tried the goofy low wattage bulbs/units but, of course, they didn't draw enough current to work the flasher.
The battery is new, fully charged and on a tender. The turn signal relay is brand new, gets 12+ volts and there?s an audible ?click? when thumbing the switch at the handlebar.
All four signals light up, nice and bright rather than dull half-lit but they do not flash.
I checked the connections dozens of times and everything is tight and clean. The lights are even grounded to a clean spot on the frame.
What am I missing in order to get them to wink? Thanks...
The battery is new, fully charged and on a tender. The turn signal relay is brand new, gets 12+ volts and there?s an audible ?click? when thumbing the switch at the handlebar.
All four signals light up, nice and bright rather than dull half-lit but they do not flash.
I checked the connections dozens of times and everything is tight and clean. The lights are even grounded to a clean spot on the frame.
What am I missing in order to get them to wink? Thanks...