D
dennie
Guest
Question. I haves just acquired a 1983 GS400E, not running.
I have cleaned the carbs, but am unable to get them to prime. I just wanted to fire up the engine using a small reservoir of fuel feeding the main fuel hose.
I need to clean and seal the tank as its rusty. So have no tank to use.
I suspect that I must have the tank connected with the hose to the fuel level float connected as well as the fuel delivery hose. Does the GS400 require the vacuum hose connected to open the carb diaphragm and or prime the float bowls?
There are also 2 breather hoses, one on each carb. Where are these supposed to connect to?
I have cleaned the carbs, but am unable to get them to prime. I just wanted to fire up the engine using a small reservoir of fuel feeding the main fuel hose.
I need to clean and seal the tank as its rusty. So have no tank to use.
I suspect that I must have the tank connected with the hose to the fuel level float connected as well as the fuel delivery hose. Does the GS400 require the vacuum hose connected to open the carb diaphragm and or prime the float bowls?
There are also 2 breather hoses, one on each carb. Where are these supposed to connect to?