Got the 81 750L running well and was wondering today about RPMs at cruise. Seems I can be in 3rd or 5th at 55 no issues either way. What are ya'll thoughts on RPMs while cruising?
-
Required reading for all forum users!!!
Welcome!
Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.A note to new registrants...
All new forum registrations must be activated via email before you have full access to the forum.A Special Note about Email accounts!
DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.A note to old forum members...
I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.
Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...
-
Returning Visitors
If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.
If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.
Thoughts on cruising RPMs?
- Thread starter Andrew Vanis
- Start date
sure, but at what point are the RPMs too low. Yeah, I get when it starts to lug/surge its too low but is there another too low or at least lower than "optimum" what ever optimum means?
My guess is that as long as it's not lugging, the lower the revs, the less the wear and the better the gas mileage. I could be off, but not by much.
Of course, every bike, especially those ridden very conservatively, needs to stretch it's legs and get near redline occasionally. Keeps the innards clean.
Of course, every bike, especially those ridden very conservatively, needs to stretch it's legs and get near redline occasionally. Keeps the innards clean.
Steve
GS Whisperer
Most GSes seem to work best between 1/2 and 2/3 of redline.
Your 750 is probably geared so 5000 RPM will get you between 65 and 70 MPH. No problems there.
In a lower-load situation, like in town, lower revs will work, but if you have to quickly apply throttle to avoid a situation, you simply will not have enough response and will have to downshift to get into a power range. The time it takes to downshift a gear or three just might be the same amount of time it would take you to get out of the situation. No need to cruise through town at 6-7000 RPM, but definitely keep it above 2000.
.
Your 750 is probably geared so 5000 RPM will get you between 65 and 70 MPH. No problems there.
In a lower-load situation, like in town, lower revs will work, but if you have to quickly apply throttle to avoid a situation, you simply will not have enough response and will have to downshift to get into a power range. The time it takes to downshift a gear or three just might be the same amount of time it would take you to get out of the situation. No need to cruise through town at 6-7000 RPM, but definitely keep it above 2000.
.
Kind'f related, why my 2000 Kawasaki ZRX1100 & my "99" & "05" Suzuki Bandit 1200's still have 5 spd., roughly direct dr. in 5th gear, transmissions, while the old mid "80"'s Suzuki & Kawasaki 550cc & 600cc bikes had 6 spd O/D transmissions. My newer bikes seem to need, & would be happier with a the taller O/D gearing, way better than those old 550 & 600cc bikes, that had absolutely no passing power, without down shifting a time or two. Why on earth do the more powerful 1100 & 1200 cc bikes of today still have the 5 spds., & why did the mfg's, back in the 80"s put the 6 spd. O/D's in the much weaker mid sized bikes, when the larger more powerful bikes were much more capable, & actually needed, in my opinion, a taller gear for cruising at a lower rpm. To me, it still doesn't make sense.
My owner's manual states to shift at these intervals,
1st 0-12mph
2nd 12-19mph
3rd 19-25mph
4th 25-31mph
5th over 31mph
That seems too low to shift from 4th to 5th, especially merging onto the highway. Cruising at highway speeds, since my speedo is still wonky, I keep it around 5500 to 6k ish in 5th. 6500rpm's is around 80mph and fuel mileage suffers, but the engine doesn't seem to mind staying there.
1st 0-12mph
2nd 12-19mph
3rd 19-25mph
4th 25-31mph
5th over 31mph
That seems too low to shift from 4th to 5th, especially merging onto the highway. Cruising at highway speeds, since my speedo is still wonky, I keep it around 5500 to 6k ish in 5th. 6500rpm's is around 80mph and fuel mileage suffers, but the engine doesn't seem to mind staying there.
Those are probably break-in numbers.
On my GS1000s and 1100, I like the feel of accellerating from 2000 or 2500 rpm. Some old roller bearing Porsches had early lower end bearing failures which were blamed on lugging. I figure if it pulls hard, its in its power band, and its OK. For cruising, bine tend to get a harmonic drone over 5500 rpm, so I tend to keep them under 75 or so to avoid that.
I don't think you are going to hurt it.
On my GS1000s and 1100, I like the feel of accellerating from 2000 or 2500 rpm. Some old roller bearing Porsches had early lower end bearing failures which were blamed on lugging. I figure if it pulls hard, its in its power band, and its OK. For cruising, bine tend to get a harmonic drone over 5500 rpm, so I tend to keep them under 75 or so to avoid that.
I don't think you are going to hurt it.
Steve
GS Whisperer
Yes, it is, and yes, it does.
.
Steve, have you reset the tripometer since 14,000 miles?
8
81gs7501166
Guest
Most jap air cooled inline 4s like 3-4K as a minimum cruise. I feel like even though they will pull lower than that, you might be doing some damage. My sohc cb750 doesn't charge the battery below 3.5K. They are ment to spin, not lug.
